Panasonic HDC-SX5P / HDC-SX5PC / HDC-SX5EG / HDC-SX5E / HDC-SX5EB / HDC-SX5EP / HDC-SX5EE / HDC-SX5GC / HDC-SX5GCS / HDC-SX5GN / HDC-SX5SG / HDC-SX5PL / HDC-SX5GK Service Manual ▷ View online
37
Fig. E2 Rough image of set-up connection
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
Ref
Parts Name
Parts No.
Q'ty
Remarks
1
Personal Computer
---
1
With Tatsujin Software.
2
AC Adaptor
---
1
The AC Adaptor for High Definition Video Camera
3
DC Cable
---
1
The AC Adaptor for High Definition Video Camera
4
USB Cable
---
1
5
Step Up Ring
VFK1164TAR37
1
6
TATSUJIN PC-Adjustment Program
---
1
38
9.3.3.
Set up PC-EVR adjustment program
1. Turn on the PC and install the TATSUJIN Adjustment Pro-
gram into the PC.
2. TATSUJIN PC-Adjustment Program start in the following
procedure.
PC Menu : [Start]
PC Menu : [Start]
→ [Program] → [win Tatsujin] → [DV
Movie]
→ [HDC-SX5 Series]
Fig. E3-1
The main menu display will be displayed.
3. Select the desired model.
4. Turn on the camcorder. Then, click
.
Fig. E3-2
5. The communication is complete, and the dialog will
appear.
Then, click
to save the EEPROM data,
Fig. E3-3
6. Saving for EEPROM data is complete, menu will appear.
To perform each adjustment, display the adjustment
menu by selecting the desired menu from
or
and select each adjustment item.
Fig. E3-4
Note:
The adjustment data is stored to the EEPROM IC
after each adjustment.
after each adjustment.
7. After adjustment, to end the software, select
in File
menu or close the window.
Fig. E3-5
39
9.3.4.
Initial guideline
The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced.
Make sure to perform these adjustments shown below as necessary.
Make sure to perform these adjustments shown below as necessary.
40
10 Maintenace
10.1. Cleaning Lens, Viewfinder and LCD Panel
Do not touch the surface of the lens, Viewfinder and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
A lens cleaning paper and lens cleaner are available at local camera shops and market place.
10.2. Cleaning Disc
1. Use the provided disc cleaning cloth, or soft and dry cloth
to lightly clean the disc from the inner to outer edges in
axial direction.
axial direction.
2. If the dirt cannot be removed with the above procedure,
put a few droplets of absolute alcohol in a soft and dry
cloth, and use it to lightly clean the disc from the inner to
outer edges in axial direction.
cloth, and use it to lightly clean the disc from the inner to
outer edges in axial direction.
10.3. Cleaning optical pickup
1. Attach the AC adapter/charger or battery (power supply), and then slide the DISC EJECT switch to open the disc insertion
block.
2. Remove the AC adapter/charger or battery (power supply).
3. Check to see whether the optical pickup is dirty. If it is not dirty, use the following procedure to clean it:
a. Apply one drop of absolute alcohol on a clean cotton swab (*1).
Lens cleaner liquid for CD/DVD (generally available) may be substituted for absolute alcohol.
b. Lightly swab the optical pickup to clean it.
Using too much force during cleaning may cause a fault to occur.
*1: Always use a fresh cotton swab free from any additive or chemical.
Click on the first or last page to see other HDC-SX5P / HDC-SX5PC / HDC-SX5EG / HDC-SX5E / HDC-SX5EB / HDC-SX5EP / HDC-SX5EE / HDC-SX5GC / HDC-SX5GCS / HDC-SX5GN / HDC-SX5SG / HDC-SX5PL / HDC-SX5GK service manuals if exist.