Panasonic HDC-SD9P / HDC-SD9PC / HDC-SD9PL / HDC-SD9E / HDC-SD9EB / HDC-SD9EE / HDC-SD9EF / HDC-SD9EG / HDC-SD9EP / HDC-SD9GC / HDC-SD9GK / HDC-SD9GN / HDC-SD9SG / HDC-SD9DE / HDC-SD9DEB / HDC-SD9DEG Service Manual ▷ View online
17
6.1.
Lock Search History Indication
1. Set the mode switch “Recording” mode.
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
2. While keep pressing the “[LEFT<] of cursor” button and “delete” button, hold down the Mode Select Switch towards to
“[FOCUS]” position for more than 3 seconds until the top screen of the Service Menu being displayed.
3. Select [ 4 ] Lock search history indication.
Operation specifications
Indication contents
• Lock search history indication
Display the camera system error cord for three histories saved in EEPROM.
• The error cord contents which are displayed
Lock search history indication is finished by POWER OFF.
Error code
Function
51
Focus control is abnormal
52
Zoom control is abnormal
53
OIS lens control is abnormal
71
Lens cover open/close is abnormal
72
Cooling fan is abnormal
73
High temperature is abnormal
33
Communication between camera to ARM is abnormal
18
7 Service Fixture & Tools
7.1.
When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.2.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
RFKZ0446
PS6003 (MAIN) - CCD FPC
50PIN 0.4 B to B
2
RFKZ0448
FP6002 (MAIN) - LENS UNIT
33PIN 0.3 FFC
3
RFKZ0343
PP6002 (MAIN) - PP6401 (FLASH)
30PIN 0.5 B to B
4
RFKZ0446
FP6001 (MAIN) - FP6502 (SIDE(R))
29PIN 0.3 FFC
5
VFK2020
PS6101 (SUB) - POWER FPC
20PIN 0.5 B to B
6
VFK1175
FP6402 (MAIN) - REAR CASE FPC
16PIN 0.5 FFC
19
CAUTION-1. (When servicing FLASH PCB)
1. Be sure to discharge the capacitor on FLASH PCB.
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH PCB”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
20
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
8.2.
PCB Location
Click on the first or last page to see other HDC-SD9P / HDC-SD9PC / HDC-SD9PL / HDC-SD9E / HDC-SD9EB / HDC-SD9EE / HDC-SD9EF / HDC-SD9EG / HDC-SD9EP / HDC-SD9GC / HDC-SD9GK / HDC-SD9GN / HDC-SD9SG / HDC-SD9DE / HDC-SD9DEB / HDC-SD9DEG service manuals if exist.