Panasonic HDC-SD900EB / HDC-SD900EE / HDC-SD900EF / HDC-SD900EG / HDC-SD900EP / HDC-SD900GC / HDC-SD900GN / HDC-SD909EG / HDC-TM900P / HDC-TM900PC / HDC-TM900PU / HDC-TM900EB / HDC-TM900EE / HDC-TM900EF / HDC-TM900EG / HDC-TM900EP / HDC-TM900GC / HDC-TM900GD / HDC- Service Manual ▷ View online
45
8.3.36.
Removal of the Focus Guide Pole L
and Focus Guide Pole S
and Focus Guide Pole S
(Fig. D53)
46
9 Measurements and Adjustments
9.1.
Electric Adjustment
• Adjustment method is different from a conventional High definition video camera.
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
• An exclusive jig and PC (including software for adjustment “Tatsujin”) are necessary for electric adjustment.
• A USB driver for service is necessary to communication with PC.
• Connection method of the main unit and an exclusive adjustment jig as follows
9.1.1.
Adjustment Procedure
• Connect the main unit to PC with USB.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
Figure of connection
Figure of image when adjustment
Part Number of jig
• Only a necessary jig mentions it in setup of electric adjustment.
No.
Part Name
Part Number
Remarks
1
PC
------
2
AC Adaptor
------
3
USB Cable
------
4
46mm Step Up Ring
VFK1164TAR46
5
Adjustment Software (Tatsujin)
------
47
Adjustment Items
• Adjustment item as follows.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG/VDBG-AVC" web-site in
"TSN System".
"TSN System".
48
10 Factory Setting
10.1. How To Turn On The Factory Settings?
1. Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed or “ESD NODATA” as “NG” is displayed on LCD monitor. Cutting of battery connection
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed or “ESD NODATA” as “NG” is displayed on LCD monitor. Cutting of battery connection
or AC power supply connection as a completion of the “FACTORY SETTINGS”.
(After use at least once, even if the physical format of the build-in memory will be performed, “ESD NODATA” as “NG” is indi-
cated, but “FACTORY SETTINGS” is completed.)
(After use at least once, even if the physical format of the build-in memory will be performed, “ESD NODATA” as “NG” is indi-
cated, but “FACTORY SETTINGS” is completed.)
Click on the first or last page to see other HDC-SD900EB / HDC-SD900EE / HDC-SD900EF / HDC-SD900EG / HDC-SD900EP / HDC-SD900GC / HDC-SD900GN / HDC-SD909EG / HDC-TM900P / HDC-TM900PC / HDC-TM900PU / HDC-TM900EB / HDC-TM900EE / HDC-TM900EF / HDC-TM900EG / HDC-TM900EP / HDC-TM900GC / HDC-TM900GD / HDC- service manuals if exist.