Panasonic HDC-SD800P / HDC-SD800EB / HDC-SD800EC / HDC-SD800EEK / HDC-SD800EF / HDC-SD800EG / HDC-SD800EP / HDC-SD800GK Service Manual ▷ View online
21
7 Service Fixture & Tools
7.1.
When Replacing the Main P.C.B.
After replacing the MAIN P.C.B., be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-AVC” web-site in
“TSN system”, together with Maintenance software.
7.2.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No.
Parts No.
Connection
Form
1
RFKZ0342
PS6002(MAIN) - FP4802(MIC AMP FPC)
20PIN 0.5 B to B
2
VFK1933
PS6003(MAIN) - MONITOR FPC
34PIN 0.5 B to B
3
VFK1950
FP6001(MAIN) - FP6403(FRONT)
33PIN 0.3 FFC
4
RFKZ0343
PP6006(MAIN) - PS7001(FLASH SD)
30PIN 0.5 B to B
5
RFKZ0416
FP6002(MAIN) - LENS UNIT
41PIN 0.3 FFC
6
RFKZ0582
PP6005(MAIN) - PP6751(BATT CATCHER)
60PIN 0.5 B to B
22
CAUTION-1. (When servicing FLASH SD P.C.B.)
1. Be sure to discharge the capacitor on FLASH SD P.C.B..
Refer to “HOW TO DISCHARGE THE CAPACITOR ON FLASH SD P.C.B.”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH SD P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH SD P.C.B..
3. DO NOT allow other parts to touch the high voltage circuit on FLASH SD P.C.B..
23
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart for the Unit
This is a disassembling chart.
When assembling, perform this chart conversely.
When assembling, perform this chart conversely.
8.2.
PCB Location
24
8.3.
Disassembly Procedure for the
Unit
Unit
No.
Item
Fig
Removal
1
Side Case-L Unit
(Fig. D1)
2 Screws (A)
4 Screws (B)
2 Locking tabs
Sensor Cover Unit
4 Screws (B)
2 Locking tabs
Sensor Cover Unit
(Fig. D2)
3 Screws (C)
2 Locking tabs
Side Case-L Unit
2 Locking tabs
Side Case-L Unit
2
Cover Board Unit
(Fig. D3)
1 Screw (D)
2 Screws (E)
1 Screw (F)
1 Rib
Cover Board Unit
2 Screws (E)
1 Screw (F)
1 Rib
Cover Board Unit
3
Top Case Unit
(Fig. D4)
3 Screws (G)
1 Screw (H)
2 Screws (I)
3 Locking tabs
1 Rib
SR Cover
1 Screw (H)
2 Screws (I)
3 Locking tabs
1 Rib
SR Cover
(Fig. D5)
PS6002(Connector)
1 Rib
Top Case Unit
1 Rib
Top Case Unit
4
Front Unit
(Fig. D6)
P7001(Connector)
P7002 (Connector)
1 Screw (J)
1 Locking tab
1 Rib
FP6403 (Flex)
Front Unit
P7002 (Connector)
1 Screw (J)
1 Locking tab
1 Rib
FP6403 (Flex)
Front Unit
5
Side Case-R Unit
(Fig. D7)
4 Screws (K)
PS6003 (Connector)
FP6501 (Flex)
Side Case-R Unit
PS6003 (Connector)
FP6501 (Flex)
Side Case-R Unit
6
Batt Case Unit
(Fig. D8)
1 Screw (L)
1 Screw (M)
2 Ribs
PP6005 (Connector)
Batt Case Unit
1 Screw (M)
2 Ribs
PP6005 (Connector)
Batt Case Unit
7
Lens Unit
(Fig. D9)
2 Screws (N)
1 Rib
2 Projection parts
1 Rib
2 Projection parts
(Fig. D10) PS6011 (Connector)
FP6002(Flex)
1 Screw (O)
Lens Frame Unit
Lens Unit
1 Screw (O)
Lens Frame Unit
Lens Unit
8
Main P.C.B.
(Fig. D11)
3 Screws (P)
2 Ribs
Main Heat Radiation Plate
2 Ribs
Main Heat Radiation Plate
(Fig. D12) PP6006 (Connector)
1 Projection part
Main P.C.B.
Main P.C.B.
9
Flash SD P.C.B.
(Fig. D13) 2 Screws (Q)
1 Projection part
Flash SD P.C.B.
Flash SD P.C.B.
10
Side-R OP P.C.B.
Speaker
Speaker
(Fig. D14) 2 Screws (R)
SP Angle
P6502(Connector)
P6501(Connector)
P6502(Connector)
P6501(Connector)
(Fig. D15) NOTE: (When Installing)
11
Fan Motor
(Fig. D16) 3 Convexes
Fan Damper
Fan Motor
Fan Motor
12
LCD Case Unit
(Fig. D17) 2 Screws (S)
Holder
SR OP Button
3 Locking tabs
Earth Plate
Sheet
Light Guide Plate
3 Ribs
LCD Case Unit
SR OP Button
3 Locking tabs
Earth Plate
Sheet
Light Guide Plate
3 Ribs
LCD Case Unit
13
LCD Hinge Unit
(Fig. D18) 2 Screws (V)
6 Locking tabs
LCD Case (T) Unit
FP901 (Flex)
FP902 (Flex)
LCD Hinge Unit
LCD Case (T) Unit
FP901 (Flex)
FP902 (Flex)
LCD Hinge Unit
14
Monitor P.C.B.
(Fig. D19) FP904 (Flex)
FP905 (Flex)
4 Ribs
LCD Frame
4 Ribs
LCD Frame
(Fig. D20) 4 Locking tabs
(Fig. D21) 1 Locking tab
(Fig. D21) 1 Locking tab
Reflection Sheet
Light Guide Plate
Diffusion Sheet
Prism Sheet B
Prism Sheet A
LGP Holder
Monitor P.C.B.
Light Guide Plate
Diffusion Sheet
Prism Sheet B
Prism Sheet A
LGP Holder
Monitor P.C.B.
15
Front P.C.B.
(Fig. D22) 1 Screw (a)
1 Screw (b)
FP6400 (Flex)
FP6402 (Flex)
Front P.C.B.
FP6400 (Flex)
FP6402 (Flex)
Front P.C.B.
16
Barrier Motor Unit
(Fig. D23) 1 Screw (c)
Barrier Motor Unit
(Fig. D24) NOTE: (When Installing)
17
Front Case Unit
(Fig. D25) Lens Plate
(Fig. D26) 4 Screws (d)
(Fig. D26) 4 Screws (d)
FP6402 (Flex)
Front Case Unit
Front Case Unit
18
Holl FPC Unit
Front Frame
Front Frame
(Fig. D27) 2 Locking tabs
2 Ribs
Lens Ring
Holl FPC Unit
Front Frame
Lens Ring
Holl FPC Unit
Front Frame
19
Top Frame Unit
Top Operation Unit
Top Operation Unit
(Fig. D28) 1 Screw (h)
4 Screws (i)
1 Screw (j)
P6551(Connector)
1 Locking tab
1 Rib
FP4803(Flex)
Top Frame Unit
Top Operation Unit
1 Screw (j)
P6551(Connector)
1 Locking tab
1 Rib
FP4803(Flex)
Top Frame Unit
Top Operation Unit
20
SS SW P.C.B.
(Fig. D29) 2 Screws (k)
SS SW P.C.B.
21
Mic AMP P.C.B.
(Fig. D30) FP4802(Flex)
P4801(Connector)
FP4801(Flex)
Flex
Connector
Mic AMP P.C.B.
FP4801(Flex)
Flex
Connector
Mic AMP P.C.B.
22
Mic Case Unit
(Fig. D31) 1 Screw (l)
Mic Case Unit
23
Battery AL Sheet
Gasket
Gasket
(Fig. D32) 1 Screw (n)
Battery AL Sheet
Gasket
Gasket
No.
Item
Fig
Removal
Click on the first or last page to see other HDC-SD800P / HDC-SD800EB / HDC-SD800EC / HDC-SD800EEK / HDC-SD800EF / HDC-SD800EG / HDC-SD800EP / HDC-SD800GK service manuals if exist.