DOWNLOAD Panasonic HDC-HS250P / HDC-HS250PC / HDC-HS250PU / HDC-HS200EB / HDC-HS200EC / HDC-HS200EE / HDC-HS200EG / HDC-HS200EP / HDC-HS200GC / HDC-HS200GJ / HDC-HS200GK / HDC-HS200GN / HDC-HS200GT / HDC-HS200SG / HDC-HS200EEK (serv.man3) Service Manual ↓ Size: 6.46 MB | Pages: 94 in PDF or view online for FREE

49

1. Set the mode dial “Motion Picture Recording” mode.
2. While keep pressing the “Intelligent auto” button, “Manual” button and “Menu” button for more than 3 seconds until the top

screen of the Service Mode Menu being displayed.

3. Touch the [ 1 ] of LCD.
4. Touch the [ YES ] of LCD.
5. After few seconds “END” is displayed on LCD monitor. Cutting of battery connection or AC power supply connection as a

completion of the “FACTORY SETTINGS”.

50

The factory settings clean up and/or refresh the following settings.

1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.

(Setting the folder number is 100, and file number is 0.)

4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Close the lens cover
7. Initialize the VIERA Link Physical Address.
8. Confirm the data area of HDD is cleared.

(When recorded data in HDD, "error display" is done)
If "error display" is done, execute physical format according to the following procedure.

Name

Setting position

Mode dial

OFF

S-1

S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1

S2. Block Diagram .......................................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2

S3. Schematic Diagram .................................................................. S-3
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. Side R Schematic Diagram ................................................... S-4
S3.3. LCD Schematic Diagram....................................................... S-5
S3.4. Monitor Schematic Diagram .................................................. S-6
S3.5. TPANEL Schematic Diagram ................................................ S-7
S3.6. Front Schematic Diagram ..................................................... S-8
S3.7. MOS FPC Schematic Diagram ........................................... S-12
S3.8. Power FPC Schematic Diagram ......................................... S-13
S3.9. Main Sub Schematic Diagram............................................. S-14
S3.10. Side R FPC Schematic Diagram ....................................... S-15
S3.11. LCD OP FPC Schematic Diagram .................................... S-16
S3.12. HDD FPC Schematic Diagram .......................................... S-17
S3.13. Front FPC Schematic Diagram ......................................... S-18

S4. Print Circuit Board .................................................................. S-19
S4.1. Side R P.C.B. ...................................................................... S-19
S4.2. Monitor P.C.B. ..................................................................... S-20
S4.2.1. Monitor P.C.B. (Component Side) .................................... S-20
S4.2.2. Monitor P.C.B. (Foil Side) ................................................. S-21
S4.3. Front P.C.B. ......................................................................... S-22
S4.4. MOS FPC P.C.B. ................................................................. S-23
S4.5. Power FPC P.C.B. ............................................................... S-24
S4.6. Main Sub P.C.B. .................................................................. S-25
S4.7. Side R FPC P.C.B. .............................................................. S-26
S4.8. LCD OP FPC P.C.B. ............................................................ S-27
S4.9. HDD FPC P.C.B. ................................................................. S-28
S4.9.1. HDD FPC P.C.B. (Component Side) ................................ S-28
S4.9.2. HDD FPC P.C.B. (Foil Side) ............................................. S-29
S4.10. Front FPC P.C.B. ............................................................... S-30

S5. Replacement Parts List. ......................................................... S-31

S6. Exploded View ....................................................................... S-40
S6.1. Frame and Casing Section (1) ............................................ S-40

Table of contents

VM0902001CE

Vol. 1

(S)...........Silver Type (only HDC-HS200EG/GC)

Colour

(K)...........Black Type

Model No.
HDC-HS200EB
HDC-HS200EC
HDC-HS200EE
HDC-HS200EG
HDC-HS200EP
HDC-HS200GC
HDC-HS200GJ

HDC-HS200GK
HDC-HS200GN
HDC-HS200GT
HDC-HS200SG
HDC-HS250P
HDC-HS250PC
HDC-HS250PU

High Definition Video Camera

Name of Signal

OFTR

FEP

This signal is connected
to the FEP schematic diagram.

Circuit name being connected.

6.Use the parts number indicated on the Replacement Parts List .

7.Indication on Schematic diagrams:

5.The voltage being indicated here may be include observational-error (deviation) due to

internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.

4.Although the voltage and waveform available on here is measured with standard frame,

it may be differ from actual measurement due to modification of circuit and so on.

3.The voltage being indicated on the schematic diagram is measured in

"Standard-Playback" mode when there is no specify mode is mentioned.

2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.

when the TP (Test Point) indicated as " " mark.

1.Although reference number of the parts is indicated on the P.C.B. drawing and/or

schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.

FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.

COMPONENTS IDENTIFIED WITH THE MARK

HAVE THE SPECIAL CHARACTERISTICS

S6.2. Frame and Casing Section (2) ............................................ S-41
S6.3. LCD Section ........................................................................ S-42
S6.4. Camera Lens Section.......................................................... S-43
S6.5. Packing Parts and Accessories Section. ............................. S-44

S-2

IC2006
SYSTEM CONTROL
(CAMERA MICROCOMPUTER)

ZOOM/
FOCUS

MOTOR

IRIS/
OIS

LENS(F1.8 x 12)

3MOS

IC703
LENS/OIS DRIVE

X301

OSC

IC301
CAMERA DSP
(LUPINUS)

IC6401,6402
GYRO SENSOR

IC1001
POWER CIRCUIT

IC2304
RTC

IC2007
EEPROM

IC3401
SDRAM/
512Mbit

SD
CARD

USB TERMINAL

IC3701
AVIO

SPEAKER

MIC

A/V OUT

OPERATION

DC JACK

BATTERY

FLASH
SCOPE LAMP

Q7001

7005/

QR7001,7008
FLASH DRIVE

IC3400
VIDEO
(UNIPHIERXP)

IC3601
VIDEO
ENCODER

COLOR LCD
PANEL

IC3800
HDMI
LSI

HDMI
TERMINAL

D TERMINAL

REMOTE

SENSOR

IC3402
SDRAM/
512Mbit

IC3403
NAND
FLASH/ROM

512Mbit

IC3200
USB HOST

SHUTTER

X2301

(32.768kHz)

HDC-HS200/HS250 OVERALL BLOCK DIAGRAM

IC601
LCD
DRIVER

IC4801-4803
MIC AMP

HDD