DOWNLOAD Panasonic HC-V550EE / HC-V530EE Service Manual ↓ Size: 11.88 MB | Pages: 72 in PDF or view online for FREE

26

Touch the [ 5 ] of LCD, select Power ON self check result display.
Operation specifications

• Power ON self check result display

Function to diagnose correct function of the device and interface between devices result display.

Display the following communication test result.

- Power IC : Communication test between IC3401 and IC1503
- Main IC : DDR. Communication test between IC3401 and IC3402/IC3403
- WiFi IC : Communication test between IC3401 and Wi-Fi P.C.B.. (HC-V550/V550M only)
- NFC IC : Communication test between IC3401 and NFC P.C.B. unit. (HC-V550/V550M only)

Display other than “OK” are abnomalities of each lines.

- PanTilter : Error display of the Remote Pan Tilt Cradle (VW-CTR1)

(When not connected the remote pan tilt cradle, display “--”.)
When error is occurred, display “NG” with the error code.

• Touch the [ BAK ] of LCD to exit the power on self check result display, and the POWER OFF.

Error Code

Description

NG 01

Battery undercut

NG 04

The start-up state of the update error factor

NG 10

The failure of Tilt motor

NG 80

USB Communication Error

27

Touch the [14] of LCD, select the adjustment function for the service.
Operation Specifications (until before the start of the adjustment)

The service adjustment do setup and adjustment of the following items required in the field service.
For a detailed content, such as the adjustment procedure, refer to “9 Measurements and Adjustments”.

• Model setting
• Setting of the file name for adjustment data backup to SD card.
• Execution of adjustment data backup to SD card
• Checking of Switches
• Camera adjustment (Iris, Gyro, OIS and Missing pixels, Zoom hysteresis)
• Zoom Tracking adjustments
• Indoor White Balance Adjustment (CH-GAIN, PWM, WB)
• Outdoor White Balance Adjustment (PWM, WB)
• Level shot adjustment

• Press the power button to turn the unit off.

28

Touch the [15] of LCD, select restoring the backed up adjustment data from SD card to the unit.
Operation Specifications

Restore the adjustment data to new or repaired Main P.C.B. from SD card that the data backed up from original Main P.C.B.
before repairs or replacement.
To backup the adjustment data, use “6.4. Adjustment function for the Service”.

• Press the power button to turn the unit off.

29

Touch the [16] of LCD, select the calibration of touch panel.
Operation Specifications

Calibrate the touch positions of the touch panel.

• Press the power button to turn the unit off.

Touch the [17] of LCD, select initialization of NFC (Near Field Communication) function.
Operation Specifications

This function performs the Initialization of the NFC chip and erase the settings like as  Wi-Fi connection etc..

• Press the power button to turn the unit off.