Panasonic NC-PH30ZTW (serv.man2) Service Manual ▷ View online
Order Number KAD1708004CE
Model No.
NC-PH30ZTW
Chassis
Product Color
White (W)
Destination
Russia
TABLE OF CONTENTS
PAGE
PAGE
1 Safety Precautions----------------------------------------------- 2
2 Specifications ----------------------------------------------------- 3
3 Troubleshooting Guide ----------------------------------------- 4
4 Disassembly and Assembly Instructions ---------------- 9
5 Wiring Connection Diagram ---------------------------------25
6 Exploded View and Replacement Parts List -----------28
2 Specifications ----------------------------------------------------- 3
3 Troubleshooting Guide ----------------------------------------- 4
4 Disassembly and Assembly Instructions ---------------- 9
5 Wiring Connection Diagram ---------------------------------25
6 Exploded View and Replacement Parts List -----------28
2
1 Safety Precautions
To prevent accidents during repair work, injury or property loss to the users, safety instructions are described below.
1.1.
Degree of loss or potential for injury is classified as follows.
1.2.
Safety instructions are classified with symbols as below and explana-
tions are described as follows.
tions are described as follows.
(Below symbols are examples)
3
2 Specifications
• *Specification subject change without notice.
MODEL
NC-P30ZTW
Destination
Russia
Power Supply
220V50Hz/SH3
Power
Consumption
(approx.)
Rate
700W
Boiling
700W
Keep Warm
111W
Average power con-
sumption during keep
warm
98°C
42Wh
60°C
18Wh
Capacity (approx.)
3.0L
Dimensions (approx.) [ W x D x H ]
22 x 29 x 31 cm.
Weight (approx.)
2.2 Kg
Thermal Regulation
Boiling : Relay thyristor / Sensor : Thermistor
Warning : Thyristor
Rotating Base
360° Rotation with the power cord
Thermal Fuse
157 °C
Power Cord
Approx. 1 m
Hot water supply device specifications
Hot water supply method
Air pump
Current volume adjustment range
209 ml / 5 sec
Operation Method
Push supporting plate
Pump-Lock
Push stopper
Additional functions : Long boil, Keep warm (98, 60), Overheating protection, Air pump, Lock knob (Air pump type), Citric acid cleaning.
4
3 Troubleshooting Guide
Please follow check operating detail below, before start to
check the problems.
check the problems.
LED symbol for this instruction show as below.
3.1.
Thermo Pot performance test mode
3.1.1.
Boiling and Keep warm test
How to operate
1. Pour approx. 1000 ml water into the container.
2. Supply with 220V electric power.
2. Supply with 220V electric power.
Instruction
1. Long boil/Reboil LED will be lighted and 208F/98C LED
will be blink and start to boil water.
2. After approx. 9-10 min. 208F/98C LED will be lighted and
change to keep warm state.