Panasonic MX-KM5060SSD-HK / MX-KM5060STQ-KZ / MX-KM5060STQ-RU / MX-KM5060STQ-UA Service Manual ▷ View online
5
3.2.
Non-EMC
6
4 Circuit Breaker
When the Circuit Breaker automatically stops the motor due to overloading, follow the below steps:
5 Troubleshooting Guide
Ensure to turn OFF the appliance and the power supply before taking the actions in the table below
7
6 Disassembly and Assembly Instructions
6.1.
Disassembly of Bottom Plate
1. Place the Motor Housing upside down.
2. Remove 4 screws from the Bottom Plate.
3. Pull up the Bottom Plate from the Motor Housing.
4. Reassembly
To reassemble the unit, reverse the disassembly
procedures above.
procedures above.
6.2.
Disassembly of Switch Assy
1. Remove the Bottom Plate (as shown in 6.1.).
2. Unplug the Wire Connectors which connect to PCB
2. Unplug the Wire Connectors which connect to PCB
Switch.
3. Remove the Switch Assy from the Motor Housing.
4. Reassembly
To reassemble the PCB Switch, reverse the diassembly
procedures above.
procedures above.
8
6.3.
Disassembly of Motor Unit
1. Remove the Bottom Plate (as shown in 6.1.).
2. Unplug the Wire Connectors which connect to Motor Unit.
2. Unplug the Wire Connectors which connect to Motor Unit.
3. Hold the Lower Connector Unit and turn the screwdriver
to clockwise.
4. Release the Motor Unit and Lower Connector Unit.
5. Reassembly
To reassemble the unit, reverse the disassembly
procedures above.
procedures above.
Click on the first or last page to see other MX-KM5060SSD-HK / MX-KM5060STQ-KZ / MX-KM5060STQ-RU / MX-KM5060STQ-UA service manuals if exist.