Panasonic MX-GX1561WTQ Service Manual ▷ View online
12
4.4.
How to Clean
13
5 Troubleshooting Guide
Problem
Possible cause
Page
The blender will not operate even
when the"
when the"
"button or the"
"
button has been pressed.
• The blender container or mill container is not mounted
correctly on the motor housing.
• The power plug has been disconncected from the
power oulet.
• The ingredients are clogging the cutter.
See P.6 & P.8
The blender stops operating midway
through operation.
through operation.
• The Circuit Breaker Protcetion of the motor has been
tripped.Check whether prohibited,hard or too many
ingredients have been placed in the container.
ingredients have been placed in the container.
• The Circuit Breaker Protection will also be tripped
when abnormal sounds are heard or high levels of
vibration are generated.
vibration are generated.
See P.11
The ingredients being processed are
leaking out.
leaking out.
• The blender container or mill container is not mounted
correctly.
• The gasket has not been installed.
See P.5 & P.6 & P.8
14
6 Disassembly and Assembly Instructions
6.1.
Juice Cup and Cutter Assy
1. Remove the cover, then turn the juice cup up-side-down.
2. Secure the juice cup and turn the cup base assy counter
2. Secure the juice cup and turn the cup base assy counter
clockwise. Then the packing can be removed.
3. The safety device lever from the cup base assy can be
removed after its three screws are loosened.
15
4. Turn the connector upper clockwise with long nose pliers.
Then the cutter assy and connector upper can be removed.
6.2.
Mill Cup and Cutter Assy
1. Secure the mill cup and turn the cup base assy counter
clockwise. Then the mill packing can be removed.
2. Turn the connector upper clockwise with long nose pliers.
Then the cutter assy and connector upper can be removed.
Click on the first or last page to see other MX-GX1561WTQ service manuals if exist.