Panasonic MX-GX1011WTQ Service Manual ▷ View online
13
6 Disassembly and Assembly Instructions
6.1.
Juice Cup and Cutter Assy
1. Turn the connector upper clockwise with long nose pliers.
Then the cutter assy and connector upper can be removed.
6.2.
Mill Cup and Cutter Assy
1. Secure the mill cup and turn the cup base assy counter
clockwise. Then the mill packing can be removed.
14
2. Turn the connector upper clockwise with long nose pliers.
Then the cutter assy and connector upper can be removed.
6.3.
Bottom Plate
1. The bottom plate can be removed when its four screws
are lossened.
15
6.4.
Connector(Lower)
1. Hold the part under the motor shaft by means of a screws-
driver, then turn the connector (lower) clockwise.The
connector (lower) can be removed.
connector (lower) can be removed.
• The connector (lower) can be relatively easily removed
by means of hitting its projecting section clockwise with
use of a screwdriver grip in a forceful manner.
use of a screwdriver grip in a forceful manner.
6.5.
Cord U
1. Pull out while the faston terminal with the part of the
Cord U.
6.6.
Motor Assy
1. Pull out while the faston terminal with the part of the lead
wire.
2. Takes out a motor from the body and it removes.
The brush can be exchanged by metal fittings coming
when bending fixation metal fittings.
when bending fixation metal fittings.
16
6.7.
Switch Assy
1. Pull out the switch assy in the direction of the arrow shown
in the figure to the right.
2. Remove the safety device and seal cap from the body.
Click on the first or last page to see other MX-GX1011WTQ service manuals if exist.