Panasonic MX-EX1561WTQ Service Manual ▷ View online
10
10.3. Bottom Plate
1. The bottom plate can be removed when its 3 screws are
lossened.
10.4. Connector(Motor housing)
1. Hold the part under the motor shaft by means of a minus
driver then turn the connector (Motor housing) clockwise.
The connector (Motor housing) can be removed.
The connector (Motor housing) can be removed.
• The connector (Motor housing) can be relatively easily
removed by means of hitting its projecting section clock-
wise with use of a screwdriver grip in a forceful manner.
wise with use of a screwdriver grip in a forceful manner.
10.5. Motor Assy
1. Hold the motor housing to remove the 2 screws with a
cross screwdriver from the micro switch.
And then pull out the faston terminals that are linked to
the micro switch.
And then pull out the faston terminals that are linked to
the micro switch.
2. Take out the motor from the motor housing and it
removes.
• The brush can be exchanged by metal fittings coming
when bending fixation metal fittings.
11
10.6. Cord Unit
1. Pull out the faston terminals that are linked to the rotary
switch, and then take out the cord unit.
10.7. Switch Assy
1. Pull out the main switch in the direction of the arrow
shown when pressing one pin of rotary switch in with
a minus driver.
a minus driver.
2. Press the pins of main switch in the direction of the arrow
shown with a minus driver, meanwhile, pushing the main
switch out.
switch out.
12
11 Wiring Connection Diagram
11.1. Schematic Diagram
13
11.2. Basic Wiring Diagram
Click on the first or last page to see other MX-EX1561WTQ service manuals if exist.