Panasonic MX-EX1561WTQ Service Manual ▷ View online
8
10 Disassembly and Assembly Instructions
10.1. Blender jug and blender blade assy
1. Remove the lid, then turn the juice cup up-side-down.
2. Secure the blender jug and turn the blender jug base
counter clockwise. Then the blender gasket can be
removed.
removed.
3. The safety device lever from the blender jug base can be
removed after its screw is loosened.
4. Turn the connector (Blender jug base) clockwise with long
nose pliers.
Then the blender blade assy and connector (Blender jug
base) can be removed.
Then the blender blade assy and connector (Blender jug
base) can be removed.
9
10.2. Mill Container and Mill Blade Assy
1. Secure the mill container and turn the mill container base
counter clockwise. Then the mill gasket can be removed.
2. Turn the connector (mill container base) clockwise with
long nose pliers. Then the mill blade assy and connector
(mill container base) can be removed.
(mill container base) can be removed.
10
10.3. Bottom Plate
1. The bottom plate can be removed when its 3 screws are
lossened.
10.4. Connector(Motor housing)
1. Hold the part under the motor shaft by means of a minus
driver then turn the connector (Motor housing) clockwise.
The connector (Motor housing) can be removed.
The connector (Motor housing) can be removed.
• The connector (Motor housing) can be relatively easily
removed by means of hitting its projecting section clock-
wise with use of a screwdriver grip in a forceful manner.
wise with use of a screwdriver grip in a forceful manner.
10.5. Motor Assy
1. Hold the motor housing to remove the 2 screws with a
cross screwdriver from the micro switch.
And then pull out the faston terminals that are linked to
the micro switch.
And then pull out the faston terminals that are linked to
the micro switch.
2. Take out the motor from the motor housing and it
removes.
• The brush can be exchanged by metal fittings coming
when bending fixation metal fittings.
11
10.6. Cord Unit
1. Pull out the faston terminals that are linked to the rotary
switch, and then take out the cord unit.
10.7. Switch Assy
1. Pull out the main switch in the direction of the arrow
shown when pressing one pin of rotary switch in with
a minus driver.
a minus driver.
2. Press the pins of main switch in the direction of the arrow
shown with a minus driver, meanwhile, pushing the main
switch out.
switch out.
Click on the first or last page to see other MX-EX1561WTQ service manuals if exist.