Panasonic MK-GH1WTQ / MK-GB1WTQ Service Manual ▷ View online
PTW1012542CR
Hand Mixer
Stand Mixer
Model No.
MK-GH1WTQ
Model No.
MK-GB1WTQ
CIS
TABLE OF CONTENTS
PAGE
1 SPECIFICATION --------------------------------------------------- 2
2 LOCATION ---------------------------------------------------------- 3
3 TROUBLESHOOTING ------------------------------------------- 4
4 OPERATING INSTRUCTIONS --------------------------------- 5
5 MAINTENANCE---------------------------------------------------- 7
6 FACTORY SETTING---------------------------------------------- 8
7 WIRING DIAGRAM ----------------------------------------------11
8 SCHEMATIC DIAGRAM ----------------------------------------12
9 REPLACEMENT PARTS ---------------------------------------13
2 LOCATION ---------------------------------------------------------- 3
3 TROUBLESHOOTING ------------------------------------------- 4
4 OPERATING INSTRUCTIONS --------------------------------- 5
5 MAINTENANCE---------------------------------------------------- 7
6 FACTORY SETTING---------------------------------------------- 8
7 WIRING DIAGRAM ----------------------------------------------11
8 SCHEMATIC DIAGRAM ----------------------------------------12
9 REPLACEMENT PARTS ---------------------------------------13
2
1 SPECIFICATION
Model
MK-GH1
MK-GB1
Power supply
220V / 240V - 50/60Hz
Power consumption
200W
Operation rating
5 min. (Continuous use)
Switch
5,4,3,2,1,0 (Lever type rotation cycle change switch)
Rotational cycle
(No load)
(No load)
1
Approx. 800 cycle/min.
2
Approx. 870 cycle/min.
3
Approx. 950 cycle/min.
4
Approx. 1030 cycle/min.
5
Approx. 1130 cycle/min.
Thermal fuse
Melting temperature 127 dgrees C 3A
Power coad
0.75 mm
2
vinyl coad / Length 1.7 m
Demention (Width x Depth x Height)
Approx. 88
× 184 × 134 mm
Approx. 201
× 278 × 331 mm
Demention (Width x Depth x Height)
1.2 kg
2.1 kg
Accessories
Beaters 2 pcs
○
○
Dough hooks 2 pcs
○
○
Bowl & Stand
—
○
3
2 LOCATION
4
3 TROUBLESHOOTING
Before starting to troubleshoot, check the performance of the device as follows:
3.1.
Quick Performance Test
Reference
To check only the operation of the motor, you can listen to the sound of the motor rotating, even without using beaters, a power
meter, or an ammeter.
meter, or an ammeter.
Q Procedure
1. Connect the unit to a power meter, the ammeter of a tester, or other such device.
2. Attach the beaters to the unit.
3. Set the switch in numerical order to 1, 2, 3, 4, and 5.
2. Attach the beaters to the unit.
3. Set the switch in numerical order to 1, 2, 3, 4, and 5.
Q Check points
• Check to see if the motor rotates.
• Check to see that the beaters do not come into contact.
• Check to see that the rotation speed of the motor increases in synchronicity with the speed indicated for the switch position.
• The power consumption for each switch position is shown below.
• Check to see that the beaters do not come into contact.
• Check to see that the rotation speed of the motor increases in synchronicity with the speed indicated for the switch position.
• The power consumption for each switch position is shown below.
• The above values are common to 220V and 240V.
• Compared with the above values, the actual current will tend to be lower at 220V, and higher at 240V.
• Compared with the above values, the actual current will tend to be lower at 220V, and higher at 240V.
The shape of the power cord plug differs according to the country (and region).
Switch Position
1
2
3
4
5
Power Consumption
(Current value)
(Current value)
70W approx.
(0.30A approx.)
75W approx.
(0.33A approx.)
85W approx.
(0.37A approx.)
95W approx.
(0.41A approx.)
110W approx.
(0.48A approx.)