Panasonic MK-G1800PWTQ (serv.man2) Service Manual / Parts change notice ▷ View online
Order Number KAD1710001PE
Subject : Making correction of part number.
Please revise the original parts list in the Service Manual to conform to the change(s) shown herein.
If new part numbers are shown, be sure to use them when ordering parts.
If new part numbers are shown, be sure to use them when ordering parts.
File this Parts Change Notice with your copy of the Service Manual.
Model No.
MK-G1800PWTQ
Reason for Change
*The circled item indicates the reason. If no marking, see the Notes in the bottom column.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
v 7. Correction
8. Other
Interchangeability Code
**The circled item indicates the interchangeability. If no marking, see the Notes in the bottom column.
Parts
Set Production
A
Original
New
New
Early
Late
Late
Original or new parts may be used in early or late production set.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
B
Original
New
New
Early
Late
Late
Original parts may be used in early production sets only. New parts may be used in
early or late production sets. Use original parts where possible, then stock new parts.
early or late production sets. Use original parts where possible, then stock new parts.
v
C
Original
New
New
Early
Late
Late
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
D
Original
New
New
Early
Late
Late
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
E Other
Part Number
Model No.
Ref. No.
Original Part No.
New Part No.
Notes
Part Name & Descriptions
MK-G1800PWTQ
6
AME05-123
AMM19C-300
7C Cutting plate(Fine 2.5mm)
MK-G1800PWTQ
7
AMM10C-300 AMM10C-300
-
Cutting plate(Medium 4.0mm)
MK-G1800PWTQ
8
AMM19C-300 AME05-123
7C Cutting plate(Coarse 7.0mm)
Display
