Panasonic MJ-L500STQ Service Manual ▷ View online
13
6 Key points of disassembly and assembly
Requirements:
To assemble, please follow the reverse procedure of
disassembly with reference to the key points of
assembly.
disassembly with reference to the key points of
assembly.
Preparations:
Before you begin to work, make sure that the food
pusher, juicing bowl lid, squeezing screw, juice
attachment, juicing bowl and other attachments are
removed from the motor housing.
pusher, juicing bowl lid, squeezing screw, juice
attachment, juicing bowl and other attachments are
removed from the motor housing.
6.1.
Housing Part
1. Unscrew the fixing screws (6 pieces) from the bottom
plate.
2. Remove the bottom plate.
3. Unscrew the fixing screws (2 pieces), and remove the
crimping code.
4. Slide the panel in the direction of arrow.
6.2.
Switch Unit Part
1. Slide the panel out from the body temporarily.
14
2. Unscrew the fixing screws (2 pieces), and remove the
panel cover.
*Insert the slotted screwdriver into the gap between the
panel and the panel cover, and separate them.
*Insert the slotted screwdriver into the gap between the
panel and the panel cover, and separate them.
3. Unscrew the fixing screws (4 pieces).
4. Remove the PCB case unit.
5. After the PCB case unit is removed from the panel, take
out the switch cover unit, the breaker link, and the spring.
Take care not to lose any of the parts.
* To assemble, first insert the safety lock pin of the switch
cover into the hole of the breaker link (with a spring), install
the PCB case unit, and then assemble them into the panel,
as shown in the figure.
Take care not to lose any of the parts.
* To assemble, first insert the safety lock pin of the switch
cover into the hole of the breaker link (with a spring), install
the PCB case unit, and then assemble them into the panel,
as shown in the figure.
6. Press and push the fixing claws (in 2 places), and remove
the PCB case cover
7. Remove the fast-on terminals of the switch.
15
* To remove the fast-on terminals, you can use a slotted
drive screwdriver as the link.
drive screwdriver as the link.
8. Remove the 4 stoppers of the switch, and then take out the
switch.
6.3.
Motor
1. Remove the fast-on terminals (in 4 places) connecting the
motor from the switch.
* To remove the fast-on terminals, you can use a slotted
drive screwdriver as the link.
drive screwdriver as the link.
2. Remove the body cover with a slotted drive screwdriver.
3. Remove the screws (4 pieces), and take out the motor
from the body.
16
6.4.
Serial Number Location
The serial number is marked in the center of the bottom plate.
Click on the first or last page to see other MJ-L500STQ service manuals if exist.