DOWNLOAD Panasonic MJ-DJ31STQ-RU Service Manual ↓ Size: 3.2 MB | Pages: 15 in PDF or view online for FREE

9

Step 14 Release Catches.
Step 15 Remove Juicer Attachment Rib.
Step 16 Unscrew 4 screws.

Step 17 Remove Motor Ass’y.

10

1. Insert the clearance gauge between the upper cutter surface of spinner (extractor)and the bottom of feader opening. (Fig.3)
2. When the thinner side (1/51" ... 0.5mm) can be inserted and the thicker side (1/28" ... 0.9mm) cannot, the clearance is appro-

priate.

3. If the thicker side (1/28" ... 0.9mm) can be inserted, the clearance is too large. 

In that case, remove the coupler and add some adjustment washers onto the motor shaft.

4. If the thinner side (1/51" ... 0.5mm) cannot be inserted, the clearance is too narrow.

In that case, remove the coupler and take off some adjustment washers from the motor shaft.

11

1. Remove the cover, then turn the glass container up-sidedown.
2. Secure the glass cup and turn the mounting ring counterclockwise. (Fig.4)
3. The gasket (upper) can be removed.
4. Wrap the cutting blade with a cloth for protection and secure it.
5. Turn the upper connector clockwise with long nose pliers.

Then the cutting blade, and upper connector can be removed. (Fig.5)

• The parts can be assembled by reversing the disassembly procedure.

12

1. Remove the cover, then turn the mill container up-sidedown.
2. Secure the glass cup and turn the mounting ring counterclockwise. (Fig.7)
3. Wrap the cutting blade with a cloth for protection and secure it.
4. Turn the upper connector clockwise with long nose pliers.

hen the mill cutter and upper connector can be removed. (Fig.8)

• The parts can be assembled by reversing the disassembly procedure.