Panasonic MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K Service Manual ▷ View online
Cord rewind
pedal
Switch pedal
Pedal
Spring
Fig. 12
Fig. 13
Power switch
Power switch
Fig. 14
Fig. 11
5.5. Removing cord rewind /
switch
pedals
1. Insert the minus screwdriver into the hinge area
(clearance between pedal and upper body) of the pedal
and pry off for removal. (Fig. 11)
2. When the pedals are removed, the springs are also
removed together. (Fig. 12)
5.6. Removing/replacing
power
switch
1. Using the minus screwdriver or similar, expand the upper
body’s hook which fastens the power switch. (Fig. 13)
2. Disconnect the stopper-provided faston terminal from the
switch and replace the power switch.
3. Connect the removed lead wires to the switch tabs and
reinstall in its lodging. (Fig. 14)
NOTE: Maker sure the lead wires and lower body seal
are correctly positioned to avoid pinching them
between parts.
are correctly positioned to avoid pinching them
between parts.
10
MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K
Fig. 15
Printed board
Upper body
Fig. 16
Fig. 17
Fig. 18
Cord reel Assembly
Motor unit
Lower body
Remove
connection
Remove
connection
Fig. 19
Noise suppressor
Motor
Rear motor
support
Front motor
support
Fig. 20
5.7. Removing upper body
1. Remove the printed circuit board fastening screws
(2 pieces), and float the circuit.(Fig. 15)
2. Remove the lower body seal.
3. Remove the upper body fastening screws (5 pieces)
3. Remove the upper body fastening screws (5 pieces)
at the arrowed position. (Fig. 16)
4. Remove upper body. (Fig. 17)
5.8. Replacing motor
1. Straightly pull up the motor unit from the lower body
for replacing. (Fig. 18)
2. Disconnect faston connection terminal from the motor.
(Fig.
(Fig.
19)
3. Remove front / rear motor support and noise suppressor.
(Fig.
(Fig.
20)
4. Replace motor unit with a new one.
11
MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K
Cord reel assembly
Power cord
Cord guide
Lower body
Fig. 22
Fig. 23
Remove
connection
Remove
connection
Fig. 21
5.9. Replacing the cord reel assembly
1. When the motor is removed from the lower body,
straightly pull up the cord reel from the lower body for
removal. (Fig. 21)
2. Disconnect faston connection terminals from the
cord reel. (Fig. 22)
3. Pull up the cord guide of the lower body and remove the
power cord from the guide. (Fig. 23)
4. Replace cord reel assembly with a new one and pro-wind
the power cord the extra times indicated on the cord reel
sticker.
5. Reinstall cord reel assembly, motor unit and remaining
5. Reinstall cord reel assembly, motor unit and remaining
parts in the reverse order to the removing procedure.
NOTE: Make sure the lead wires and lower body seal
are correctly positioned to avoid pinching them
between parts.
are correctly positioned to avoid pinching them
between parts.
12
MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K
Fig. 24
Power board
Upper body hole
Fig. 25
Main fuse
NOTE: Make sure the lead wires and lower body seal
are correctly positioned to avoid pinching them
between parts.
are correctly positioned to avoid pinching them
between parts.
5.10. Replacing power board
1. Remove the lead wires from the hole of the upper body.
2. Remove the power board from the upper body and
replace with a new one. (Fig. 24)
3. Connect the lead wires according to the schematic
diagram and reassemble power board and remaining
parts in the reverse order to the removing procedure.
5.11. Replacing main fuse
1. Remove main fuse connections and replace
with a new one. (Fig. 25)
2. Connect main fuse according to the schematic diagram
and reassemble the remaining parts in the reverse order
to the removing procedure.
13
MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K
Click on the first or last page to see other MC-E7305 / MC-E7305K / MC-E7303 / MC-E7303K / MC-E7302 / MC-E7301 / MC-E7301K service manuals if exist.