Panasonic MC-E7101 Service Manual ▷ View online
5.6. Replacing cord reel
1. When the motor is removed from the lower body, straightly
pull up the cord reel from the lower body for removal.
2. Disconnect the lead wires from the connection terminals
(Faston terminals) of the cord reel on the body partition.
3. Pull up and remove the power supply cord cover of the
lower body, and disconnect the cord.
4. Pro-wind the cord reel ass’y 4 or 5 times in the direction of
the arrow (
→
) indicated on the cord reel cover.
5. With the brake lever section down, fit the cord reel ass’y
into the upper body.
6. After positioning the lead wrie between the motor and body
partition, couple the lower body.
*We will provide a cord reel for units for the market together
with a lower body unit as a set, because its plug is big.
(lower body unit)
with a lower body unit as a set, because its plug is big.
(lower body unit)
9
MC-E7101
5.7. Replacing the P.C.B-A unit
1. Remove the upper body.(5.4.Reference)
2. Disconnect the two lead wires from the motor.
( 5.5.Reference)
3. Disconnect the two lead wires from the ON/OFF switch
fixed to the upper body.
4. Disconnect the two lead wires connected to the cord reel.
.(5.6.Reference)
5. Remove the bands fastening the fuse´s lead wires.
6. Remove the packing fastening the P.C.B.´s lead wires.
7. Remove the P.C.B.
5.8. Replacing the ON/OFF switch
1. Remove the three packings from around the switch.
2. Release the tab retaining the switch pedal, which you can
find by removing the packings, by applying strong pressure
and tapping with a screwdriver or a similar instrument.
and tapping with a screwdriver or a similar instrument.
3. Release the two other tabs in the same way. Note that
when releasing the second tab, it is recommended to insert
a thin flathead screwdriver to prevent the first tab from
getting back.
a thin flathead screwdriver to prevent the first tab from
getting back.
4. Remove the screws of the switch cover fastening the switch
and then remove the switch.
10
MC-E7101
6 Replace at Parts
6.1. EXPLODED VIEW (ATTACHMENT)
11
MC-E7101
6.2. PARTS LIST (ATTACHMENT)
Ref. No.
Part No.
Part Name & Description
Remarks
A-1
AMC99R-UW0
FLOOR NOZZLEASSY.(PLASTIC)
A-2
AMC94P-UW0
HOSE ASSENBLY
A-3
AMC13P-UW0
ENTENSION WAND A(PLASTIC)
E7101
A-4
AMC40P-UW0
ENTENSION WAND (PLASTIC)
E7101
12
MC-E7101
Click on the first or last page to see other MC-E7101 service manuals if exist.