Panasonic MC-E601 / MC-E603 Service Manual ▷ View online
7 PARTS LIST (ATTACHMENTS)
Ref. No.
Part No.
Part Name & Description
Remarks
1
AMC8A92V3034
Hose unit
2
AMC8A01K0034
Hose
3
AMC8A9325034
Connecting pipe unit
4
AMC8A94P1034
Curved tube unit
5
AMC8A1125034
Hose holder
6
AMC8A73T1034
Accessory support
7
AMC8A13P1034
Crevice nozzle
8
AMC8A85E1034
Extension wand (Plastic)
9
AMC8A85P3100
Telescopic wand
10
AMC8A99T1034
Floor nozzle
11
AMC8A90T1034
Floor nozzle cover
12
AMC8A89D1000
Floor nozzle brush
13
AMC8A39D1000
Floor nozzle base plate
14
AMC8A36D1000
Floor nozzle spring
15
AMC8A41D1000
Floor nozzle linen retake
16
XTN35+25BFY
Floor nozzle screw
17
XTN35+14BFY
Floor nozzle screw
18
AMC8C25V1034
Floor nozzle hook
Only for plastic extension wand
18
AMC8C25V3034
Floor nozzle hook
Only for metallic wand
13
MC-E601 / MC-E603
8 TROUBLE SHOOTING GUIDE
CONDITION
CHECKPOINT
METHOD OF INSPECTION
CAUSE / REMEDY
Motor fails to rotate.
(no noise is heard at
all).
(no noise is heard at
all).
Power cord connection
Check power cord continuity between
plug pins and contact base.
plug pins and contact base.
If there is no continuity, replace the power cord.
Motor continuity
Check
motor
continuity
between
carbon brush holder tabs.
If there is no continuity, replace the motor.
Carbon brushes
Check if there is gap between carbon
brush and conmutator.
brush and conmutator.
If
there
is
gap
between
carbon
brush
and
conmutator, replace both carbon brushes.
ON/OFF Switch
Check
continuity
across
switch
connections.
If there is no continuity, replace power control circuit.
Thermal cut-out
Check continuity across thermal cut-
out tabs.
out tabs.
If there is no continuity, replace thermal cut-out.
Triac
Check if the triac is in open circuit.
If it is in open circuit, replace power control circuit.
Power control circuit
Check if the diac is in open circuit.
If it is in open circuit, replace power control circuit.
Rotating potentiometer (VR2) Check if the potentiometer is in open
circuit.
If it is in open circuit, replace power control circuit.
Trimmer potentiometer (VR1) Place the rotating potentiometer at min.
power and check if the potentiometer
(VR1) is adjusted at 450W.
(VR1) is adjusted at 450W.
If it is adjusted at 450W and the motor doesn‘t work,
replace power control circuit.
replace power control circuit.
Motor runs but does
not suction.
not suction.
Hose or Suction inlet
Check if there is any blockage in the
hose or suction inlet.
hose or suction inlet.
If there is any blockage, remove it.
Dust bag / Central filter
Check if dust bag is full or dust
accumulated in central filter.
accumulated in central filter.
If the paper bag is full, replace it. If the central filter is
dirty, clean or replace it.
dirty, clean or replace it.
Noise or vibration.
Motor fan
Check dust accumulated in motor fan
(it could happen if the vacuum cleaner
has been used with a broken bag or
without central filter).
(it could happen if the vacuum cleaner
has been used with a broken bag or
without central filter).
If there is dust accumulated in motor fan, replace
the motor and check filter condition. (never try to
dismantle the motor fan).
the motor and check filter condition. (never try to
dismantle the motor fan).
Motor does not
change power.
(Runs always at full
speed).
change power.
(Runs always at full
speed).
Rotating potentiometer
Check if the potentiometer is short-
circuited.
circuited.
If it is short-circuited, power control circuit.
Power control circuit
Check if the power control circuit is
short-circuited.
short-circuited.
If it is short-circuited, replace it.
Motor runs
irregularly.
irregularly.
Rotating potentiometer
Check possible bad contact of the
rotating potentiometer PCB tracks.
rotating potentiometer PCB tracks.
If there is bad contact, replace power control circuit.
14
MC-E601 / MC-E603
9 PACKING INSTRUCTION
15
MC-E601 / MC-E603
10 PACKING LIST
Ref. No.
Part No.
Part Name & Description
Remarks
1
AMC8Z01V1000
Carton box
MC-E601
1
AMC8Z01V3000
Carton box
MC-E603
2
AMC8Z02V1000
Cushion A
3
AMC8Z03V1000
Cushion B
4
AMC8Z18V1000
Cushion C
5
AMC8Z07V1010
Operating instructions
Spanish, English, Portuguese, Italian, Finish and Greek
5
AMC8Z07V1070
Operating instructions
German, Dutch, French, Swedish, Norwegian and Danish.
5
AMC8Z07V1020
Operating instructions
Russian
16
MC-E601 / MC-E603