DOWNLOAD Panasonic MC-CG712AR79 Service Manual ↓ Size: 7.4 MB | Pages: 15 in PDF or view online for FREE

5

Step 7 Remove Body Cover using slotted screwdriver.

Step 8 Push one by one follow the arrow to take out the pedal.

Step 9 Pull the On/Off switch to change position.

Step 10 Lift up Upper Body.

Step 11 Remove Upper Body from Lower Body.

6

Step 1 Release Rear Cover from Screw Holders.
Step 2 Remove Rear Cover.

Step 3 Pull up Motor Case Set from Lower Body.

Step 1 Release the pretension of the Cord Reel Unit slowly by
holding on the Power Plug and pressing on the Brake Lever.

Step 2 Remove the Cord Reel Unit from the Motor Case Set by
inserting a slotted screwdriver into the shaft of the Cord Reel
Unit and turning it 90



 counter-clockwise.

To assemble:
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the 
steel at the side of Cord Reel Unit.

7

Step 1 Remove 1 screw.

Step 2 Release Catch and pull upward.

Step 3 Remove Fasten Terminals on the Rail Base Unit.

Step 1 Remove the Swivel Cap.
Step 2 Remove 1 screw from top and 2 screws bottom Motor
Case Set.

Step 3 Remove the Tabs.

8

Step 4  Open Motor Case Unit

Step 5 Disconnect Wire Terminals and remove Motor Set.

Step 6 Remove Noise Suppressor Unit and Motor Support
Rubbers.