Panasonic MC-CG462-RR79 / MC-CG462RR79 Service Manual ▷ View online
9
4.5.
Cord reel partition unit replace-
ment
ment
1. Increase the gap width between the cord reel and the
lower body with a screwdriver. While removing the cord
reel shaft from the side of the lower body, lift the cord reel
partition unit.
reel shaft from the side of the lower body, lift the cord reel
partition unit.
* For easy removal, pull out the cord slightly, and
then lift the cord reel.
4.6.
Rail base U replacement
1. Remove the screw fixing the rail base U onto the cord reel
partition U.
2. Remove the rail base U from the cord reel partition U.
4.7.
Spring-loaded cord reel pre-
winding
winding
1. The cord reel partition U has a spring that pre-winds the
cord reel.
If the cord is not wound, then press the brake arm, and
the cord pre-winding will be loosened.
If you wish to apply pre-winding again, then wind the cord
three turns in the direction of the arrow mark.
* If you wish to release the pre-winding, then make
If the cord is not wound, then press the brake arm, and
the cord pre-winding will be loosened.
If you wish to apply pre-winding again, then wind the cord
three turns in the direction of the arrow mark.
* If you wish to release the pre-winding, then make
sure to hold the cord plug.
10
5 Wiring Connection Diagram
MODEL MC-CG462-RR79
11
6 Exploded View and Replacement Parts List
6.1. EXPLODED VIEW (ATTACHME
NTS)
)
)!
)#
)"
)
12
6.2. PARTS LIST (ATTACHME
NTS)
Safety Ref.No
Service Parts No.
Part Name & Description
Q'TY
Remarks
A1
AMC94P-YP0VP
HOSE ASS'Y
1
A2
AMC99P-UZ00P
EXTENSION WAND UNIT
1
A3
AMC99R-UA0KP
FLOOR NOZZLE ASS'Y
1
A4
AMC60R-UA0VP
CREVICE TOOL
1
(Crevice Nozzle)
A5
AMC88R-UA0VP
DUSTING BRUSH
1
Click on the first or last page to see other MC-CG462-RR79 / MC-CG462RR79 service manuals if exist.