Panasonic EW-DJ40 Service Manual ▷ View online
5
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Pull out the tank and the water suction tube.
2. Remove the switch by inserting slotted screwdriver, then
remove the switch lever.
3. Insert the slotted screwdriver into the hole and remove
the housing C.
6
4. Remove the nozzle release button by loosing the hook.
5. Unfasten three screws and remove the housing B little by
little by inserting the slotted screwdriver into the holes of
nozzle release button.
nozzle release button.
6. Unfasten the screw from the chassis block and remove
the battery case from the housing B.
7
7. Unfasten the screw and remove the plug and the module
from the housing B.
8. Remove the six screws.
8
4.2.
Caution In Assembly
Refer to the Disassembly Instructions.
1. Set the pump block, the face gear and the motor correctly.
2. Hang the protuberance of tube on the battery case.
3. Hang the blue and the red lead wires on each hook. And pass those lead wires through the bottom of chassis. Set the module
and the plug.
Click on the first or last page to see other EW-DJ40 service manuals if exist.