Panasonic ES2044-E8 / ES2047-E8 Service Manual ▷ View online
1 SCHEMATIC DIAGRAM
2
2 WIRING DIAGRAM
2
3 DISASSEMBLY INSTRUCTIONS
3
2006 Works,
. and is a
of .
. and is a
of .
ES2044-E8
ES2047-E8
ES2047-E8
4 ASSEMBLY INSTRUCTIONS
4
5 TROUBLESHOOTING GUIDE
5
6 EXPLODED VIEW and REPLACEMENT PARTS LIST
6
Epilator
SPECIFICATIONS
Power source
AC 220-240V, 50-60Hz
Power consumption
Approx. 5W
Motor voltage
12V DC
Charging time
12 hours
Weight
135g (unit with the big epilation head)
130g (unit with the sm epilation head / unit with the shaver head)
Supplied accessories
Soft case
Cleaning brush
CONTENTS
Page
Page
ORDER NO. PCD0606E34CE
1 SCHEMATIC DIAGRAM
2 WIRING DIAGRAM
2
ES2044-E8 / ES2047-E8
1. Remove the cap and the epilation head.
Loosen three screws on top.
2. Remove the head mounting base, side panel, switch and
switch cam. Remove the chassis with pushing the head
release buttons.
release buttons.
3. Loosen two screws and take out the plug block with using
the plug remove jig.
Insert the jig and push into the plug connector and take it
out.
Insert the jig and push into the plug connector and take it
out.
3 DISASSEMBLY INSTRUCTIONS
3.1. MAIN UNIT
Follow the procedure below to disassemble the main body.
3
ES2044-E8 / ES2047-E8
1. Remove the foil frame, inner blade and trimmer driving bar.
NOTE: Lift the trimmer driving bar up by using
something like a slotted head screwdriver as shown in
figure with care of breakage.
something like a slotted head screwdriver as shown in
figure with care of breakage.
For assembly, reverse the order of disassembly.
1. Confirm the colors of each lead wire when soldering with
1. Confirm the colors of each lead wire when soldering with
motor.
2. Press fit the lead wires into housing neatly.
3. Put fuse into frame located side of chassis and fixed it with
3. Put fuse into frame located side of chassis and fixed it with
an adhesive tape.
3.2. SHAVER HEAD
4 ASSEMBLY INSTRUCTIONS
4.1. MAIN UNIT
4
ES2044-E8 / ES2047-E8