Panasonic ES2023 / ES2024 / ES2027 / ES2024V530 / ES2023A530 / ES2024V501 / ES2027D501 Service Manual ▷ View online
ES2023/2024/ES2027
5
3 ASSEMBLY INSTRUCTIONS
3.1 MAIN UNIT
For assembly, reverse the order of disassembly.
1. Confirm the colors of each lead wire when soldering
1. Confirm the colors of each lead wire when soldering
with motor.
2. Press fit the lead wires into housing neatly.
3. Put fuse into frame located side of chassis and fixed it
3. Put fuse into frame located side of chassis and fixed it
with an adhesive tape.
4. Close the housing A and B and tighten two screws after
assembling housings with the bottom cover.
ES2023/2024/ES2027
6
3.2 SHAVER HEAD(only for ES2027)
1. Confirm the direction of driving head and install a
driving head in the blade holder after inserting the motor
tip pin into an elliptic hole of the motor camshaft.
tip pin into an elliptic hole of the motor camshaft.
2. Install the blade mounting base, dust-proof rubber,
retaining plate and tighten two screws.
3. Confirm the direction of trimmer driving bar.
ES2023/2024/ES2027
7
4 TROUBLESHOOTING GUIDE
(Refer to WIRING CONNECTION DIAGRAM)
<TROUBLE>
<REMEDY>
Motor does not operate.
NO Replace charging
→ Connect to rated voltage with the charging adaptor.
→
adaptor.
OK if it is approximately DC11.5V.
↓
OK
NO Replace epilation head.
Check if there is any deformation with skin protector.
→
↓
OK
NO Repair connection of
Check continuities between (+) terminal of plug chassis and (+) terminal of motor,
→
soldering part.
or (-) terminal of plug chassis and (-) terminal of motor.
OK if there is continuities with switching ON without connecting charging adaptor.
OK if there is continuities with switching ON without connecting charging adaptor.
NO
NO
→
Repair connection of
Check conditions of soldering part at motor terminals, plug chassis and printed
soldering part.
circuit boards.
→
Replace switch terminal
OK
plate.
↓
OK
NO Replace the motor.
The motor should turn when 12V DC is applied to terminals.
→
<CHECK.>
<CHECK CHARGING ADAPTOR.>
<CHECK DRIVING BLOCK.>
<CHECK MOTOR.>
<CHECK EPILATION HEAD.>
<CHECK CONNECTING POINTS>
ES2023/2024/ES2027
8
5 EXPLODED VIEW & REPLACEMENT PARTS LIST
5.1. EXPLODED VIEW for ES2023/ES2024
Click on the first or last page to see other ES2023 / ES2024 / ES2027 / ES2024V530 / ES2023A530 / ES2024V501 / ES2027D501 service manuals if exist.