DOWNLOAD Panasonic ES-SA40 Service Manual ↓ Size: 343.61 KB | Pages: 8 in PDF or view online for FREE

Order Number SD0811E60CE2

Europe
Russia

PAGE

PAGE

1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
4 Disassembly and Assembly Instructions ---------------- 4
5 Wiring Connection Diagram ---------------------------------- 6
6 Schematic Diagram ---------------------------------------------- 6
7 Exploded View and Replacement Parts List ------------ 7

2

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70

°F (30 - 40°C) higher.  Please

use a soldering iron with temperature control and adjust it to 750 ± 20

°F (400 ± 10°C).  In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100

°F / 600°C).

3

4

1. Remove the protective cap, the outer foil frame and the

inner blade.

2. Slide the trimmer approx. 8mm to upper side, and remove

the trimmer by using straight -edge screwdriver.
Note :

If you remove the trimmer by forcing, it is easy to
break.

3. Remove the trimmer driving bar by pressing it outward.

4. Loosen two screws, and remove the retaining plate and

the waterproof rubber.
Note :

Be careful not to lose the O-rings.

5. Remove the blade holder.