Panasonic ER-GY10CM520 Service Manual ▷ View online
5
6. Loosen two screws on top.
7. Take out the housing B.
NOTE:
Make sure not to lose the O-ring.
8. Remove the housing A.
NOTE:
Make sure not to lose two screw O-rings.
9. Loosen two screws.
6
10. Take out the chassis assembly.
11. Take out the O-ring from the bottom of battery cover.
12. Unhook the terminal base from the chassis.
7
4.2.
Assembly Instructions
1. Chassis assembly
Make sure to attach the washer and the O-ring with the
battery terminal.
battery terminal.
Place the switch cam B into the hole of chassis. Make
sure that the projection of switch cam is placed on 4
o’clock position. Be sure to attach the O-rings.
sure that the projection of switch cam is placed on 4
o’clock position. Be sure to attach the O-rings.
Attach the O-ring and set the coil on the terminal base.
Tighten two screws with the magnetize screwdriver.
8
2. Switch handle
Fit the hook of switch handle into the hole of housing.
Place fit the switch handle with OFF position.
Place fit the switch handle with OFF position.
3. Housing C
Fit the hook of housing C into the hole of housing.
Click on the first or last page to see other ER-GY10CM520 service manuals if exist.