Panasonic ER-GN30 Service Manual ▷ View online
Order Number SD1011R62CE
Nose & Facial Hair Trimmer
Model No.
ER-GN30
CIS
TABLE OF CONTENTS
PAGE
PAGE
1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Disassembly and Assembly Instructions ---------------- 3
4 Schematic Diagram ---------------------------------------------- 3
5 Exploded View and Replacement Parts List ------------ 4
2 Specifications ----------------------------------------------------- 2
3 Disassembly and Assembly Instructions ---------------- 3
4 Schematic Diagram ---------------------------------------------- 3
5 Exploded View and Replacement Parts List ------------ 4
2
1 Warning
Caution:
• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70
°F (30 - 40°C) higher. Please
use a soldering iron with temperature control and adjust it to 750 ± 20
°F (400 ± 10°C). In case of using high temperature solder-
ing iron, please be careful not to heat too long.
• Pb free solder will tend to splash when heated too high (about 1100
°F / 600°C).
2 Specifications
3
3 Disassembly and Assembly Instructions
3.1.
Disassembly Instructions
1. Remove the battery cover.
2. Unhook the housing B by inserting something like a slotted screwdriver into the bottom cavity as shown in the figure below.
3. Loosen a screw.
4 Schematic Diagram
Model No. : ER-GN30 Exploded View
5 Exploded View and Replacement Parts List
Display