Panasonic ER-GB40 Service Manual ▷ View online
ER-GB40
5
11. Remove the housing B.
12. Slide the chassis, and reversing the direction of the arrow.
13. Remove the battery o-ring and washer in battery. Take
out the rechargeable battery from the chassis.
4.2.
Cautions in Assembly
NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
4.2.1.
Motor
1. Place the red mark on upper side. Fit the shape of motor
balancer and the hole of housing A and insert into hous-
ing A.
ing A.
4.2.2.
Rechargeable battery
1. Insert the rechargeable battery into chassis. Attach the
battery o-ring and washer to the battery.
4.2.3.
Side terminal
1. Insert the side terminals on both sides.
ER-GB40
6
4.2.4.
Module chassis assembly
Confirm the correct wiring.
1. Place RED lead wire.
2. Move BLUE lead wires aside.
3. Place BLACK lead wire in right position.
2. Move BLUE lead wires aside.
3. Place BLACK lead wire in right position.
Place module chassis assembly in the housing.
NOTE:
NOTE:
Press fit the lead wire neatly to avoid any pinching especially for the both side.
4.2.5.
Screw
1. Tighten screws with 1.47+-4.9N cm to prevent the break-
age of housing or making a crevice in the housing.
ER-GB40
7
5 Schematic Diagram
ER-GB40
8
6 Exploded View and Replacement Parts List
6.1.
Exploded View
Click on the first or last page to see other ER-GB40 service manuals if exist.