Panasonic EH-NE84-K865 Service Manual ▷ View online
4. Disassembly and Assembly Instructions
4.1. Disassembly Instructions
7. Remove Ion Holder from DISCHARGE COVER as figure below.
8. Take off MOTOR HEATER ASSEMBLY, and PLATE SPRING from HOUSING B.
9. Remove PRINTED CIRCUIT ASSEMBLY from MOTOR HEATER ASSEMBLY
as figure below
as figure below
Unclip this 2 ribs
Unclip this 2 ribs
4.2 Assembly Instructions
1. Install PRINTED CIRCUIT ASSEMBLY into MOTOR HEATER ASSEMBLY as figure below.
Lead wire for PCB must be lock with ribs of MOTOR HEATER ASSEMBLY as below.
Lead wire lock on this ribs
(No control color)
2. Install MAIN SWITCH PLATE AB and MAIN SWITCH HOLDER.
3. Install Ion discharge in to DISCHARGE COVER.
Ribs of MAIN SWITCH
HOLDER must fully
lock with MAIN SWITCH
(2 Ribs)
HOLDER must fully
lock with MAIN SWITCH
(2 Ribs)
4. Assemble MOTOR HEATER ASSEMBLY, COOL SWITCH PLATE and PLATE SRPING into HOUSING B.
Lead wire to Heater
block assembly
must not on this area
block assembly
must not on this area
Position of component must be as below
Click on the first or last page to see other EH-NE84-K865 service manuals if exist.