Panasonic EH-NA65-K865 Service Manual ▷ View online
5
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Remove the FILTER FRAME BLOCK ASS'Y.
2. Remove three TAPPING SCREWS by a cross slot screw
driver, then remove AIR INLET RING.
3. Remove TAPPING SCREW at HOUSING C by flat-blade
screwdriver and two TORX SCREWS at HOUSING A by
driver then remove HOUSING A.
driver then remove HOUSING A.
4. Take off HOUSING AB method as below.
6
5. Remove MOTOR HEATER BLOCK ASS'Y and PLATE SPRING for FILTER FRAME BLOCK ASS'Y from AIR OUTLET RING,
then remove AIR OUTLET RING as below.
6. Remove HOUSING C as below.
7. Remove NANO CIRCUIT BOARD ASS'Y from MOTOR HEATER BLOCK ASS'Y as below.
7
4.2.
Assembly Instructions
1. Install NANO CIRCUIT BOARD ASS'Y into MOTOR HEATER MOTOR BLOCK as below drawing.
8
2. Install MAIN SWITCH PLATE A , B and MAIN SWITCH HOLDER.
3. Install ION CHARGE BOARD ASS"Y to ELECTRIFICATION PANEL.
Click on the first or last page to see other EH-NA65-K865 service manuals if exist.