Panasonic EH-NA30-W865 Service Manual ▷ View online
5
4 Disassembly and Assembly Instructions
4.1.
Disassembly instruction
1. Remove the FILTER FRAME BLOCK ASS'Y.
2. Remove three-TAPPING SCREWS by a cross slot screw
driver ,then Remove AIR INLET RING.
3. Remove two TAPPING SCREWS at HOUSING A by flat-
blade screwdriver and two TORX SCREWS at HANDLE
by Driver then remove HANDLE AB and CLICK RING ,
SWIVEL RING.
by Driver then remove HANDLE AB and CLICK RING ,
SWIVEL RING.
4. Take off HOUSING AB method as below.
5. Remove LED COVER.
6
6. remove MOTOR HEATER BLOCK ASS'Y and PLATE SPRING for FILTER FRAME BLOCK ASS'Y from AIR OUTLET RING ,
then remove AIR OUTLET RING as below.
7. Remove HOUSING C as below.
8. Remove NANO CIRCUIT BOARD ASS'Y from MOTOR HEATER BLOCK ASS'Y as below.
7
4.2.
Assembly instruction
1. Install NANO CIRCUIT BOARD ASS'Y into MOTOR HEATER MOTOR BLOCK as below drawing.
8
2. Install Air outlet grill into Air outlet ring
3. Install a MOTOR HEATER BLOCK ASS'Y , an AIR INLET RING , a LED COVER into HOUSING B
4. Install a MOTOR HEATER BLOCK and wiring Lead wire into HANDLE B as drawing.
Click on the first or last page to see other EH-NA30-W865 service manuals if exist.