Panasonic EH-HV52-K865 Service Manual ▷ View online
4 Disassembly and Assembly instructions
4.1 Disassembly instruction
(1) Remove SHAFT COVER from Main Body
(4) Remove PIVOT SPRING by gripping
by Slotted SCREW driver (Minus Driver.)
and pulling it out from the Main body
(2) Remove TORX SCREWS at SHAFT position.
by SCREW driver (Plus driver).
(5) Remove 6 SCREWS for fitting
PRESS PLATE side by screw drivers
(Plus Driver).
PRESS PLATE side by screw drivers
(Plus Driver).
(3) Remove SHAFT out by tiny-shaped screw
(6) Remove PRESS PLATE COVER at the
drivers (Plus Driver) and pull it out from the main body. Hook part by Slotted screw driver
(Minus Driver).
Shaft Cover
Minus Driver
Spring
Take off Screws
Screws
Shaf
t
Push by Plus Driver
(7) Remove LOCK BUTTON and LOCK BUTTON SPRING.
(10) Take off PRESS PLATE.
(8) Remove Iron Plate of HEATER B from Hook.
(11) Remove 2 TORX SCREWS of the
HOUSING side by SCREWS driver
(Plus Driver).
HOUSING side by SCREWS driver
(Plus Driver).
(9) Remove SLIDE PLATE and SLIDE SPRING.
(12) Remove 6 SCREWS by SCREWS driver
(Plus Driver).
Lock Button
Iron Plate
Lock Button Spring
Press Plate
Iron Plate(Press Plate side)
Screws
Screws
At this Position
Slide Spring
Take off Slide Plate follow
this direction
this direction
(13) Remove HOUSING A from HOUSING B in Grip (14) Take off IRON PLATE and CIRCUIT
follow as below drawing.
BOARD ASSEMBLY from HOUSING A.
B
B
1 Take off Iron plate from hook of Housing B slide
and Take off Iron plate from hook Iron Plate
and Take off Iron plate from hook Iron Plate
2 Take off Circuit by push at hook of Housing B
Hook
Housing A
Springs
2 When Remove Housing A
Becaureful 4 sprins disappear.
Becaureful 4 sprins disappear.
4.2 Assembly instruction
(1) SHAFT COVER fixing point.
(2) HOUSING B ASSEMLBY Point.
Have control direction.
part and part must be same direction.
part and part must be same direction.
part
part
Shaft
Press Plate
Power cord
Connector Cover
When in sert Power cord must be surely
assembly in Connector cover follow as below.
(Should be apply Foil at connector of Power cord)
assembly in Connector cover follow as below.
(Should be apply Foil at connector of Power cord)
Click on the first or last page to see other EH-HV52-K865 service manuals if exist.