Panasonic EH-HS95-K865 Service Manual ▷ View online
5
4 Disassembly and Assembly Instructions
4.1.
Disassembly Instructions
1. Remove Shaft Cover from Main Body by Slotted screw
driver (Minus Driver).
NOTE:
NOTE:
Use NEW Shaft cover once disassembling due to
easily breakage or looseness of hook.
easily breakage or looseness of hook.
2. Remove Torx screws at Shaft position by Phillips screw
driver (Star Driver).
3. Remove Shaft out by tiny-shaped Phillips screw drivers
and pull it out from the Main body.
4. Remove Pivot spring by gripping and pulling it out from
the Main body.
5. Remove Slide Lock Plate from Main Body by Slotted
screw driver (Minus Driver).
NOTE:
Use NEW Shaft cover once disassembling due to
easily breakage or looseness of hook.
easily breakage or looseness of hook.
6
6. Remove Tapping Screw from Housing side and press
Plate side Phillips screw driver (Plus Driver).
7. Remove Housing A from Housing B and remove Press
Plate Cover from Press Plate follow as below drawing.
• When remove Housing A,
Becareful Floating Spring 4 pcs. disappear
8. Take off Iron Plate and (Micro) PCB Assembly 200C from
Housing B.
• Take off Iron Plate from Housing B.
Slide and take off Iron Plate from Hook.
• Take off (Micro) PCB Assembly from Housing B by push
at Hook of Housing B.
9. Remve Tapping Screw from Heater holder B by Philips
screw driver (Plus Driver).
7
10. Take off Iron Plate and (High Voltage Igniter) PCB
Assembly from Press Plate.
• Take off Iron Plate from Press Plate.
• Take off (High Voltage Ignitre) PCB Assembly from Press
Plate.
8
4.2.
Assembly Instructions
1. Shaft Cover fixing point. Have control direction.
2. Housing B Assembly Point. When insert Power cord must be surely assembly in Connector Cover follow as below.
Click on the first or last page to see other EH-HS95-K865 service manuals if exist.