Panasonic UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 Service Manual ▷ View online
33
(10) Remove 2 P6A Bushings (316).
(11) Remove the Eject Roller (303).
(10)
(11)
34
2.2.7.
Transmit Motor (324)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, 326)
(Refer to 2.2.5.).
(3) Disconnect the Connector (1020) from the
Transmit Motor (324).
(4) Remove the ADF Gear (305) and ADF Angular
Shaft (338).
Caution:
When removing the ADF Gear, rotate the Transmit
Motor Gear by hand until the Gear Latch Hook can
be seen from the inside, under the Transmit Motor.
Push down on the Latch Hook to release the ADF
Gear.
Motor Gear by hand until the Gear Latch Hook can
be seen from the inside, under the Transmit Motor.
Push down on the Latch Hook to release the ADF
Gear.
(5) Remove 2 Screws (19).
(6) Remove the Transmit Motor (324).
(6) Remove the Transmit Motor (324).
Caution:
Reinstall the Transmit Motor (324) as illustrated.
Caution:
Before reassembling, apply EM-50L Grease to the
Gear Posts as illustrated.
Gear Posts as illustrated.
(3)
(4)
(5)
(6)
35
2.2.8.
Scanner Block (321), Mirror 1 (334), Mirror 2 (335), Mirror 3 (336), ADF Roller (331)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, 326)
(Refer to 2.2.5.).
(3) Remove 1 Screw (19).
(4) Remove the Harnesses from the hook.
(5) Remove the Scanner Block (321).
(4) Remove the Harnesses from the hook.
(5) Remove the Scanner Block (321).
(6) Remove P10 and P6B Bushings (315, 318) by
using Blade-tip Screwdriver.
(7) Remove the ADF Roller (331).
<Cleaning Mirror 1, Mirror 2 and Mirror 3>
Clean Mirror 1 (334), Mirror 2 (335) and Mirror 3
(336) with a soft cloth, soaked with isopropyl alcohol.
(336) with a soft cloth, soaked with isopropyl alcohol.
(3)
(4)
(5)
(6)
(7)
Mirror 1
Mirror 2
Mirror 3
36
2.2.9.
LED Array (329), Feed Roller (302)
(1) Remove the Scanner Block (321)
(Refer to 2.2.8.).
(2) Remove the Ground Plate (317).
(3) Remove 4 Screws (19).
(4) Release the Harness from the hook.
(5) Remove the LED Bracket (306) Assembly.
(3) Remove 4 Screws (19).
(4) Release the Harness from the hook.
(5) Remove the LED Bracket (306) Assembly.
(6) Remove 3 LED Clips (307).
(7) Remove the LED Array (329).
(7) Remove the LED Array (329).
Caution:
When reinstalling the LED Array, position the
3 LED Clips at the appropriate locations.
3 LED Clips at the appropriate locations.
(8) Remove the Gears, Bushings and the Roller
Wire Spring (Refer to 2.2.6.).
(9) Remove 2 P6A Bushings (316).
(10) Remove the Feed Roller (302).
(2)
(3)
(4)
(5)
(6)
(7)
(10)
(9)
Click on the first or last page to see other UF-580 / UF-590 / UF-780 / UF-790 / UF-5100 / UF-6000 / UF-6100 service manuals if exist.