Panasonic UE-407019NA Service Manual / Supplement ▷ View online
Installation
45
8.2
Customizing Your Machine
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either of two dialing methods (Tone or Pulse), depending on the type of telephone
line you are connected to. If you need to change the dialing method to Tone or Pulse, follow the procedure below.
line you are connected to. If you need to change the dialing method to Tone or Pulse, follow the procedure below.
(see Note 1)
1
2
3
4
Set the dialing method for the First Telephone Line (Line-1).
for “PULSE”.
or
for “TONE”.
or
5
6
Set the dialing method for the Second Telephone Line (Line-2).
for “PULSE”.
or
for “TONE”.
or
7
Note:
1. This feature may not be available in some countries, it depends on the country's specifications or regulations.
If it is not available, the LCD will not display this feature.
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨
∧
4
SET
FAX PARAMETER(01-99)
NO.=
0
6
SET
06 DIALING METHOD
2:TONE (L-1)
1
2
06 DIALING METHOD
1:PULSE (L-1)
06 DIALING METHOD
2:TONE (L-1)
SET
06 DIALING METHOD
2:TONE (L-2)
1
2
06 DIALING METHOD
1:PULSE (L-2)
06 DIALING METHOD
2:TONE (L-2)
SET
STOP
Panasonic G3 Communication Port Kit
46
Setting the Ring Pattern (DRD)
If you have an optional "Distinctive Ring Service" provided by your Local Telephone Company, your machine can
be programmed to respond to 1 of the 4 distinctive ring patterns associated with each of the telephone numbers
assigned to your fax machine. To select the appropriate ring pattern for your fax number, follow the steps below.
be programmed to respond to 1 of the 4 distinctive ring patterns associated with each of the telephone numbers
assigned to your fax machine. To select the appropriate ring pattern for your fax number, follow the steps below.
1
2
3
4
Select the ring pattern for the First Telephone Line (Line-1).
Press
for Standard Ring Pattern (Type A).
Press
for Double Ring Pattern (Type B).
Press
for Triple Ring Pattern (Type C, Short-Short-Long).
Press
for the all other Triple Ring Pattern except the
Type C above.
Ex:
for Double Ring Pattern (Type B).
5
6
Select the ring pattern for the Second Telephone Line (Line-2).
Ex:
for Triple Ring Pattern (Type C, Short-Short-Long).
7
Note:
1. This feature may not be available in some countries, it depends on the country's specifications or regulations.
If it is not available, the LCD will not display this feature.
FUNCTION
7
4
SET
FAX PARAMETER(01-99)
NO.=
3
6
SET
36 RING PATTERN(DRD)
1:INVALID (L-1)
2
SET
36 RING PATTERN(DRD)
1:A (SINGLE) (L-1)
1
2
3
4
2
36 RING PATTERN(DRD)
2:B (DOUBLE) (L-1)
SET
2
SET
36 RING PATTERN(DRD)
1:A (SINGLE) (L-2)
3
36 RING PATTERN(DRD)
3:C (TRIPLE-1)(L-2)
SET
STOP
Installation
47
Setting Line Selection (L-1 and L-2)
Normally, the machine will automatically select the first available telephone line to transmit the documents when
you manually dial the telephone number from the keypad. You may preselect the telephone line that is used for all
direct dialed transmissions following the steps below.
you manually dial the telephone number from the keypad. You may preselect the telephone line that is used for all
direct dialed transmissions following the steps below.
Line 1 is the telephone line that is connected to the main unit and Line 2 is the telephone line that is connected
to the optional G3 Communication Port.
to the optional G3 Communication Port.
Before storing the documents, you can override the preset line selection by pressing the
key on
the Control Panel.
1
2
3
4
Select the home position of the Telephone Line selection.
Press
for
Auto.
Press
for Line-1 (First Telephone Line).
Press
for Line-2 (Second Telephone Line).
Ex:
for Line-2 (Second Telephone Line).
5
LINE SELECT
FUNCTION
7
SET MODE (1-6)
ENTER NO. OR
∨ ∧
4
SET
FAX PARAMETER(01-99)
NO.=
8
8
SET
88 LINE SELECTION
1:AUTO
1
2
3
3
88 LINE SELECTION
3:LINE-2
SET
STOP
Panasonic G3 Communication Port Kit
48
Notes
Click on the first or last page to see other UE-407019NA service manuals if exist.