Panasonic KX-MB283RU / KX-MB783RU Service Manual ▷ View online
41
KX-MB283RU/KX-MB783RU
6.11. LSU (Laser Scanning Unit) SECTION
42
KX-MB283RU/KX-MB783RU
43
KX-MB283RU/KX-MB783RU
6.12. SENSORS AND SWITCHES SECTION
All of the sensor and switches are shown below.
Note:
See TEST FUNCTIONS - SENSOR CHECK SECTION for the sensor test.
(#815 of Service Mode test. Refer to TEST FUNCTIONS (P.84).
(#815 of Service Mode test. Refer to TEST FUNCTIONS (P.84).
Sensor Name
Sensor Location
Reference number
Message Error
Pickup sensor
Pickup & Fan2 PCB
SW50
[PAPER JAMMED] [CHECK REAR CVR]
[WRONG PAPER & PRESS START]
[WRONG PAPER & PRESS START]
Exit sensor
Fuser PCB
PS50
[PAPER JAMMED]
Read position sensor
Sensor PCB
PS53
[CHECK DOCUMENT]
Resistance& Manual paper sensor Resist & PTOP PCB
PS51
[PAPER JAMMED]
Print timing sensor
Resist & PTOP PCB
PS52
[PAPER JAMMED]
Document sensor
Sensor PCB
PS54
-
Top cover sensor
H.V.P.S
SW1
[TOP COVER OPEN]
Toner sensor
Sensor PCB
IC50
[TONER EMPTY]
[TONER LOW]
[CHECK DRUM]
[TONER LOW]
[CHECK DRUM]
Handset hook switch (KX-
MB783RU ONLY)
MB783RU ONLY)
Handset PCB
SW940
-
44
KX-MB283RU/KX-MB783RU
6.12.1. DRUM DETECTION
DRUM SENSOR is not arranged.
DRUM unit is detected when HVERR SENSOR arranged in H.V.P.S becomes effective.
DRUM unit is detected when HVERR SENSOR arranged in H.V.P.S becomes effective.
6.12.2. PICKUP SENSOR
Paper SENSOR is not arranged.
Paper is detected when PICKUP SENSOR described as follows becomes effective.
This Switch detects whether a recording paper is picked up or not, and whether Rear Cover is opened or closed.
When there is a recording paper at the position of the switch, the input signal of IC300-AE20pin becomes low level.
When there is no recording paper at the position of the switch, the input signal of IC300-AE20pin becomes high level.
Paper is detected when PICKUP SENSOR described as follows becomes effective.
This Switch detects whether a recording paper is picked up or not, and whether Rear Cover is opened or closed.
When there is a recording paper at the position of the switch, the input signal of IC300-AE20pin becomes low level.
When there is no recording paper at the position of the switch, the input signal of IC300-AE20pin becomes high level.
High Voltage ERROR Status
Drum sensor
Signal (IC300-P26)
Abnormal
DRUM can not be detected Low level
Normal
DRUM can be detected
High level
Pickup status
Idling status
Signal (IC300-AE20pin)
A paper exists
Rear Cover opened
Low level
No papers
Rear Cover closed
High level
Click on the first or last page to see other KX-MB283RU / KX-MB783RU service manuals if exist.