Panasonic KX-FT982UA / KX-FT982UA / KX-FT984UA / KX-FT988UA / KX-FT988UA Service Manual ▷ View online
53
KX-FT982UA-B / KX-FT982UA-W / KX-FT984UA-B / KX-FT988UA-B / KX-FT988UA-W
9.2.
Character Entry
54
KX-FT982UA-B / KX-FT982UA-W / KX-FT984UA-B / KX-FT988UA-B / KX-FT988UA-W
10 Test Mode
The codes listed below can be used to perform simple checks for some of the unit’s functions. When complaints are received
from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the
Service mode (Refer to Operation Flow (P.58).) first, then operate the below test items.
from customers, they provide an effective tool for identifying the locations and causes of malfunctions. To do this, you set the
Service mode (Refer to Operation Flow (P.58).) first, then operate the below test items.
Test Mode
Type of Mode
Code
Function
Operation after code
input
MEMORY CLEAR
Service Mode
[5] [5] [0]
Refer to Memory Clear Specification (P.61).
[SET]
FLASH MEMORY
CHECK
CHECK
Service Mode
[5] [5] [1]
Indicates the version and checks the sum of the FLASH MEMORY.
[SET]
DTMF SINGLE TONE
TEST
TEST
Service Mode
[5] [5] [2]
Outputs the DTMF as single tones. Used to check the frequencies of the individ-
ual DTMF tones. Refer to DTMF Single Tone Transmit Selection (P.55).
ual DTMF tones. Refer to DTMF Single Tone Transmit Selection (P.55).
[1]: ON
[2]: OFF
MODEM TEST
Service Mode
[5] [5] [4]
Telephone line circuit is connected automatically, output the following signals on
the circuit line.
1) OFF 2) 9600bps 3) 7200bps 4) 4800bps 5) 2400bps 6) 300bps 7) 2100Hz
8) 1100Hz
the circuit line.
1) OFF 2) 9600bps 3) 7200bps 4) 4800bps 5) 2400bps 6) 300bps 7) 2100Hz
8) 1100Hz
[SET]
SCAN TEST
Service Mode
[5] [5] [5]
Turns on the LEDs of the CIS and operates the read systems.
Refer to CIS (Contact Image Sensor) Section (P.127).
Refer to CIS (Contact Image Sensor) Section (P.127).
[SET]
MOTOR TEST
Service Mode
[5] [5] [6]
Rotates the transmission and reception motor to check the operation of the motor.
02: FAX TX / Reading memory
06: Cutter (KX-FT984/KX-FT988 only)
08: Recording paper is fed
10: Copy
13: Recording Paper reverse
06: Cutter (KX-FT984/KX-FT988 only)
08: Recording paper is fed
10: Copy
13: Recording Paper reverse
Press [STOP] button to quit.
[SET]
LED TEST
Service Mode
[5] [5] [7]
All LEDs above the operation panel board flash on and off, or are illuminated.
[SET]
LCD TEST
Service Mode
[5] [5] [8]
Checks the LCD indication.
Illuminates all the dots to check if they are normal.
Refer to No LCD Indication (P.124).
Illuminates all the dots to check if they are normal.
Refer to No LCD Indication (P.124).
[SET]
KEY TEST
Service Mode
[5] [6] [1]
Checks the key operation except [STOP] key.
Indicates the button code on the LCD while the button is pressed, see Button
Code Table (P.56)
Refer to No Key Operation (P.124).
Indicates the button code on the LCD while the button is pressed, see Button
Code Table (P.56)
Refer to No Key Operation (P.124).
The available key is
any one that except
[STOP] key.
any one that except
[STOP] key.
CUTTER TEST
(KX-FT984/KX-FT988
only)
(KX-FT984/KX-FT988
only)
Service Mode
[5] [6] [2]
Perform cutter test 10 times.
[SET]
MEMORY CLEAR
(except History data)
(except History data)
Service Mode
[7] [1] [0]
Refer to Memory Clear Specification (P.61).
[SET]
VOICE PROMPT TEST
(KX-FT988 only)
(KX-FT988 only)
Service Mode
[7] [8] [4]
You can hear the voice prompt from speaker after pressing “SET” key.
[SET]
55
KX-FT982UA-B / KX-FT982UA-W / KX-FT984UA-B / KX-FT988UA-B / KX-FT988UA-W
10.1. DTMF Single Tone Transmit Selection
When set to ON (=1), the 12 keys and transmission fre-
quencies are as shown.
quencies are as shown.
When set to OFF (=2), the 12 keys and transmission fre-
quencies are as shown.
quencies are as shown.
Note:
After performing this check, do not forget to turn the setting off.
Otherwise, dialing in DTMF signal will not work.
Otherwise, dialing in DTMF signal will not work.
SENSOR TEST &
VOX TEST
VOX TEST
Service Mode
[8] [1] [5]
If you enter this mode and operate sensor levers with your hands, the LCD display
of the related sensor (or switch) turns ON / OFF. Also, when copying a document,
the related sensor will turn ON / OFF.
For each sensor’s operation, refer to Sensors and Switches (P.27).
of the related sensor (or switch) turns ON / OFF. Also, when copying a document,
the related sensor will turn ON / OFF.
For each sensor’s operation, refer to Sensors and Switches (P.27).
LCD DISPLAY
Do: Document set sensor
Paper inserted. Turns on when a document is inserted.
Sn: Document top sensor.
At the read position, turns on when the front cover is opened and the sensor
lever is pressed directory.
lever is pressed directory.
Co: Cover open sensor
Turns on and off when the front cover is opened and closed.
Jm: JAM sensor
When JAM sensor is on “Jm” functions.
Ct: Cutter sensor (KX-FT984/KX-FT988 only)
When cutter sensor is on “Ct” functions.
Vx: Vox signal (KX-FT988 only)
:Detection signal for the tone on the line. Turns on when there is a tone signal
on the line
on the line
Note:
• Press [STOP] button to quit.
[SET]
DIGITAL
SPEAKERPHONE
RX & TX CHECK
(KX-FT988 only)
SPEAKERPHONE
RX & TX CHECK
(KX-FT988 only)
Service Mode
[8] [4] [1]
Refer to Digital Speakerphone (KX-FT988 only) (P.119).
SPEAKERPHONE
PRINT TEST
PATTERN
PATTERN
Service Mode
[8] [5] [2]
Prints out the test pattern.
You can select 1~4. (See Print Test Pattern (P.57))
You can select 1~4. (See Print Test Pattern (P.57))
[SET]
Test Mode
Type of Mode
Code
Function
Operation after code
input
key
High Frequency (Hz)
key
Low Frequency (Hz)
“1”
697
“5”
1209
“2”
770
“6”
1336
“3”
852
“7”
1477
“4”
941
“8”
1633
High (Hz)
1209
1336
1477
Low (Hz)
697
“1”
“2”
“3”
770
“4”
“5”
“6”
852
“7”
“8”
“9”
941
“
”
“0”
“#”
56
KX-FT982UA-B / KX-FT982UA-W / KX-FT984UA-B / KX-FT988UA-B / KX-FT988UA-W
10.2. Button Code Table
Code
Button Name
Code
Button Name
Code
Button Name
04
FAX /START
31
1
47
AOH
05
LOWER
32
2
06
COPY
33
3
64
STATION KEY 1
08
MONITOR / DIGITAL SP-PHONE
34
4
65
STATION KEY 2
09
BROADCAST
35
5
66
STATION KEY 3
0A
HANDSET MUTE / MUTE
36
6
67
STATION KEY 4
0C
AUTO ANSWER
37
7
68
STATION KEY 5
0D
SET
38
8
1E
[ ] NEXT
39
9
1F
[
] PREV
3A
0
00
NO INPUT
3B
--
STOP
14
RECORD (KX-FT988 only)
3C
#
16
ERASE (KX-FT988 only)
3D
REDIAL/PAUSE
18
PLAYBACK (KX-FT988 only)
3E
FLASH (RECALL)
20
MENU
25
[ + ] VOLUME
26
[—] VOLUME
Click on the first or last page to see other KX-FT982UA / KX-FT982UA / KX-FT984UA / KX-FT988UA / KX-FT988UA service manuals if exist.