DOWNLOAD Panasonic KX-FT982RU / KX-FT984RU / KX-FT988RU Service Manual ↓ Size: 5.59 MB | Pages: 127 in PDF or view online for FREE

57

58

The programming functions are used to program the various features and functions of the machine, and to test the machine.
This facilitates communication between the user and the service man while programming the unit.

There are 2 basic categories of programming functions, the User Mode and the Service Mode. The Service Mode is further bro-
ken down into the normal and special programs. The normal programs are those listed in the Operating Instructions and are
available to the user. The special programs are only those listed here and not displayed to the user. In both the User and Ser-
vice Modes, there are Set Functions and Test Functions. The Set Functions are used to program various features and functions,
and the Test Functions are used to test the various functions. The Set Functions are accessed by entering their code, changing
the appropriate value, then pressing the SET key. The Test Functions are accessed by entering their code and pressing the key
listed on the menu. While programming, to cancel any entry, press the STOP key.

Refer to Translation Lists (P.10) for display.

59

Code

Function

Set Value

Effective 

Range

Default

Remarks

501

Pause time

× 100 msec

001~600

030

 ---------- 

503

Dial speed select

1: 10 pps
2: 20 pps

1, 2

1

 ---------- 

510

VOX time (KX-FT988 only)

1:6 sec
2:4 sec

1, 2

2

Setting of the end of call confirmation VOX.

511

VOX sensitivity (KX-FT988 only)
 

1: High
2: Low

1, 2

1

When the TAM (or EXT TAM) does not stop recording 
the ICM because noise is detected on the telephone 
line, change this setting to “LOW”.

512

VOX mode Detection (KX-FT988 only) 1: A

2: B

1, 2

1

 ---------- 

514

Bell detection time

× 100 msec

1~9

6

 ----------

520

CED frequency select

1: 2100 Hz
2: 1100 Hz

1, 2

1

See Symptom/Countermeasure Table for long distance 
and international calls in The unit can copy, but can-
not transmit/receive  (P.87).

521

International mode select

1: ON
2: OFF

1, 2

1

See Symptom/Countermeasure Table for long distance 
and international calls in The unit can copy, but can-
not transmit/receive  (P.87).

522

Auto standby select

1: ON
2: OFF

1, 2

1

The resolution reverts to the default when transmission 
is complete.

523

Receive equalizer select

1:  0 km
2:  1.8 km
3:  3.6 km
4:  7.2 km

1~4

1

When the telephone station is far from the unit or recep-
tion cannot be performed correctly, adjust accordingly.

524

Transmission equalizer select

1:  0 km
2:  1.8 km
3:  3.6 km
4:  7.2 km

1~4

1

When the telephone station is far from the unit or trans-
mission cannot be performed correctly, adjust accord-
ingly.

544

Document feed position

× mm

1~9

5

When the ADF function is in correct, adjust the feed 
position.

550

Memory Clear

See Memory Clear Specification (P.61).

551

Flash memory check

See Test Mode (P.54).

552

DTMF single tone test

1: ON
2: OFF

1, 2

2

See Test Mode (P.54).

553

Monitor on FAX communication select

1: OFF
2: PHASE B
3: ALL

1~3

1

Sets whether to monitor the line signal with the unit's
speaker during FAX communication or not.

554

Modem test

See Test Mode (P.54).

555

Scan test

See Test Mode (P.54).

556

Motor test

See Test Mode (P.54).

557

LED test

See Test Mode (P.54).

558

LCD test

See Test Mode (P.54).

559

Document jam detection select

1: ON
2: OFF

1, 2

1

Sets whether or not to detect a paper jam. If a docu-
ment with a length longer than 600 mm is copied or 
transmitted, the unit stops copying or transmitting as a 
paper jamming because a document over 600 mm is 
not normal. In the factory, transmitting or copying a doc-
ument longer than 600 mm is done as an aging test. In 
this case, OFF is selected. 

560

Cutter selection 
(KX-FT984/KX-FT988 only)

1: ON
2: OFF

1, 2

1

Turns off the cutter function. 

561

KEY test

See Test Mode (P.54).

562

Cutter test (KX-FT984/KX-FT988 only)

See Test Mode (P.54).

567

T0 timer

× second

001~255

031

 ---------- 

570

BREAK % select

1: 61%
2: 67%

1, 2

1

Sets the % break of pulse dialing according PBX.

571

ITS auto redial time set

× number of 
times

00~99

03

Selects the number of times that ITS is redialed (not 
including the first dial).

572

ITS auto redial line disconnection time 
set

× second

001~999

040

Sets the interval of ITS redialing.

60

573

Remote turn-on ring number set

× number of 
rings

00~99

10

Sets the number of rings before the unit starts to 
receive a document in the TEL mode.

580

TAM continuous tone detection
(KX-FT988 only)

1: ON
2: OFF

1, 2

1

ON: Stops TAM operation when Dial tone, etc are 
detected.

590

FAX auto redial time set

× number of 
times

00~99

03

Selects the number of redial times during FAX commu-
nication (not including the first dial).

591

FAX auto redial line disconnection time 
set

× second

001~999

065

Sets the FAX redial interval during FAX communication.

592

CNG transmit select

1: OFF
2: ALL
3: AUTO

1~3

2

Lets you select the CNG output during FAX transmis-
sion. ALL: CNG is output at phase A. AUTO: CNG id 
output only when automatic dialing is performed. OFF: 
CNG id not output at phase A. Refer to Sometime 
there is a transmit problem (P.85).

593

Time between CED and 300bps

1: 75 msec
2: 500 msec
3: 1 sec

1~3

1

See Symptom/Countermeasure Table for long dis-
tance and international calls in The unit can copy, but 
cannot transmit/receive  (P.87). Refer to Receive 
Problem (P.86) and The unit can copy, but cannot 
transmit/receive  (P.87).

594

Overseas DIS detection select

1: Detects at 
the 1st time

2: Detects at 
the 2nd time

1, 2

1

See Symptom/Countermeasure Table for long dis-
tance and international calls in The unit can copy, but 
cannot transmit/receive   (P.87). Refer to Sometime 
there is a transmit problem (P.85) and The unit can 
copy, but cannot transmit/receive  (P.87).

595

Receive error limit value set

1: 5 %
2: 10 %
3: 15 %
4: 20 %

1~4

2

Sets the number of acceptable error lines when the 
FAX reconstructs the received data. Refer to Receive 
Problem (P.86).

596

Transmit level set

× -1 dBm

 00~15

11

Selects the FAX transmission level. Refer to Sometime 
there is a transmit problem (P.85) and Receive Prob-
lem (P.86).

598

Receiving sensitivity

× -1 dBm

20~48

43

Used when there is an error problem. Refer to The unit 
can copy, but the transmission and reception image 
are incorrect (P.90).

710

Memory clear except History data

Refer to Memory Clear Specification (P.61).

717

Transmit speed select

1: 9600 BPS
2: 7200 BPS
3: 4800 BPS
4: 2400 BPS

1~4

1

Adjusts the speed to start training during FAX transmis-
sion. Refer to Sometime there is a transmit problem 
(P.85) and The unit can copy, but the transmission 
and reception image are incorrect (P.90).

718

Receive speed select

1: 9600 BPS
2: 7200 BPS
3: 4800 BPS
4: 2400 BPS

1~4

1

Adjusts the speed to start training during FAX recep-
tion. Refer to Receive Problem (P.86) and The unit 
can copy, but the transmission and reception image 
are incorrect (P.90).

722

Redial tone detect

1: ON
2: OFF

1, 2

1

Sets the tone detection mode after redialing.

731

CPC mode (KX-FT988 only)

1: ON
2: OFF

1, 2

1

Sets the CPC signal detection mode from the converter.

732

AUTO disconnect cancel time

1: 350 ms
2: 1.8 sec
3: OFF

1~3

1

“Set to “2” when the auto disconnect circuit operates.
and cuts the line.”

763

CNG detect time for friendly reception

1: 10 sec
2: 20 sec
3: 30 sec

1~3

3

Selects the CNG detection tone of friendly reception.

773

DIS-DCS interval

1: 500 msec
2: 200 msec

1, 2

2

This is similar to #594. The time interval from receiving 
DIS to sending DCS can be changed to wait for the 
echo canceler to recover.

774

T4 timer

× 100 msec

00~99

00

Use this function when delay occurs in the line and 
communication (ex. Mobile comm) does not work well.

784

Voice Prompt Test (KX-FT988 only)

See Test Mode (P.54).

815

Sensor test & Vox test (Vox test is available for KX-FT988 only.)

See Test Mode (P.54).

841

Digital SP-Phone check (KX-FT988 only)

See Digital Speakerphone (KX-FT988 only) (P.117).

845

Setting scanning density

00~32

00~32

08

Select scanning density when the code No.58 is set 
“Normal”. If you want darker, select smaller value. If you 
want fainter, select larger value. Refer to Program 
Mode Table (P.93).

Code

Function

Set Value

Effective 

Range

Default

Remarks