DOWNLOAD Panasonic KX-FT982CA / KX-FT984CA / KX-FT988CA Service Manual ↓ Size: 5.64 MB | Pages: 127 in PDF or view online for FREE

77

78

Test Mode (P.54)

79

Journal 2 and Journal 3 shown below, which are special journals giving the additional detailed information about the latest 35
communications, can be printed by Service Code 881 or 882. Remote printing function for the journal reports (JOURNAL,
JOURNAL 2 and JOURNAL 3) is also available for service technicians. (Refer to Remote Programming (P.92).)   The JOUR-
NAL report only gives you basic information about a communication, but the other two journal reports provide different informa-
tion on the same item (communication).

1. Look at NO. 01 in the JOURNAL. If you want to know about the details about that item, see NO. 01 in the JOURNAL 2 and the

JOURNAL 3. You can get the following information.
* MODE: Fax transmission
* RCV. MODE: TEL
* TX SPEED: 9.6 kbps
* RESOLUTION: standard
* ENCODE: MH
* MAKER CODE: 79

2. Look at NO. 04 in the JOURNAL 2. CNG (0003) indicates that the CNG signal has been received three times since the pur-

chase date.

For further details, see Journal 2 (P.80) and Journal 3 (P.81).

80

Refer to JOURNAL 2 in Printout Example (P.81).
Journal 2 displays the additional detailed information about the last 35 communications.

Indicates which receive mode the unit was in when the unit received a fax message.
This information is also displayed when the unit transmitted a fax message.

Indicates the speed of the communication. If multiple pages are transmitted or received, it indicates the last page’s communica-
tion speed. If there is a communication error, "?" is displayed.

Indicates the resolution of the communication. If multiple pages are transmitted or received, it indicates the last page’s resolu-
tion. If there is a communication error, "?" is displayed.

Indicates the trigger that causes the unit to switch to the fax receive mode. The available options are listed in JOURNAL 2 in
Printout Example (P.81). The values in parentheses indicate how many times the trigger has been used. (For example, "0003"
means three times.)

→MEMORY

Indicates the reason why the unit received a fax message in memory.
If you look at No.11 in the JOURNAL 2 in Printout Example (P.81), it shows the fax message was received in memory due to
"PAPER OUT" error.

The "NO RESPONSE DISAPPEARED ON JOURNAL" displays the information about the last 10 communications terminated
by "No Response". (Some of the communications terminated by "No Response" were not displayed in the JOURNAL.)
When a fax transmission cannot be performed because the other party’s unit is set to the TEL mode, "No response" will be
printed.

No.

Display

Function

1

FAX MODE

Means the unit received a fax message in the FAX mode.

2

MAN RCV

Means the unit received a fax message by manual operation.

3

FRN RCV

Means the unit received a fax message by friendly signal detection.

4

VOX

Means the unit detected silence or no voice.

5

RMT DTMF

Means the unit detected DTMF (Remote Fax activation code) entered remotely.

6

PAL DTMF

Means the unit detected DTMF (Remote Fax activation code) entered by a parallel connected tele-
phone.

7

TURN-ON

Means the unit started to receive after 10 rings. (Remote Turn On: Service Code #573)

8

TIME OUT

Means the unit started to receive after Ring Time Out in the EXT-TAM or TEL/FAX mode.

9

IDENT

Means the unit detected Ring Detection.

10

CNG OGM

Means the unit detected the CNG while it was sending the Dummy Ring Back Tone in the TEL/FAX
mode.
OR 
Means the unit detected the CNG while it was sending the OGM in the ANS/FAX mode.

11

CNG ICM

Means the unit detected the CNG while it was recording the ICM in the ANS/FAX mode.