Panasonic KX-FP343UA Service Manual ▷ View online
1
Open the front cover by pulling up the center part.
2
Push the back cover open button (green) on the right side of the
unit.
OR
Push the back cover open lever (green) inside of the unit.
unit.
OR
Push the back cover open lever (green) inside of the unit.
3
Open the back cover.
4
Insert the gear of blue core of the front ink film roll into the left
slot of the unit (
slot of the unit (
). Insert the rear ink film roll (
).
5
Turn the gear of blue core in the direction of the arrow.
·
Make sure that the ink film is wrapped around the blue core
at least once.
at least once.
6
Close the back cover securely by pushing down on the dotted
area at both ends (
area at both ends (
). Close the front cover securely (
).
·
The ink film is safe to touch and will not rub off on your
hands like carbon paper.
hands like carbon paper.
3.3.4. INSTALLING THE INK FILM
17
KX-FP343UA
3.3.5. INSTALLING THE RECORDING PAPER
A4 size recording paper can be loaded. The unit can hold up to 50 sheets of 75 g/m
2
paper. You may use 60 g/m
2
to 90 g/m
2
paper. See the note for paper specifications.
1
Before inserting a stack of paper, fan the paper to prevent paper
jams.
jams.
2
Pull the tension plate forward (
) and hold open while inserting the
paper.
·
The paper should not be over the tab (
).
·
If the paper is not inserted correctly, readjust the paper, or
the paper may jam.
the paper may jam.
18
KX-FP343UA
3.3.6. DOCUMENTS THE UNIT CAN FEED
Note:
·
Remove chips, staples or other similar fasteners.
·
Do not send the following types of documents. (Use the copies for fax transmission.)
— Chemically treated paper such as carbon or carbon less duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the other side (i.e. newsprint)
·
Check that ink, paste or correction fluid has dried completely.
·
To transmit the document with a width of less than 210 mm, we recommend using a copy machine to copy the original
document onto A4 or letter-sized paper, than transmit the copied document.
document onto A4 or letter-sized paper, than transmit the copied document.
19
KX-FP343UA
The logo can be your company, division or name.
Refer to LCD MESSAGES (P.3).
3.3.7. SETTING YOUR LOGO
To enter your logo
Pressing the [#] key will change to capital or lower-case
alternatively.
alternatively.
1.
Press [2] 2 times.
2.
Press [4] 3 times.
3.
Press [5] 3 times.
4.
Press [ ] to move the cursor to the next space and press
[5] 3 times.
[5] 3 times.
1
Press [MENU].
2
Press [ ] or [ ] until the following is displayed.
3
Press [SET].
To correct a mistake
Press [ ] or [ ] to move the cursor to the incorrect character,
and make the correction.
and make the correction.
To delete a character
Press [ ] or [ ] to move the cursor to the character you want
to delete and press [STOP].
to delete and press [STOP].
To insert a character
1.
Press [ ] or [ ] to move the cursor to the position to the
right of where you want to insert the character.
right of where you want to insert the character.
2.
Press [MUTE] to insert a space and enter the character.
4
Enter your logo, up to 30 characters
5
Press [SET].
·
The next feature will be displayed.
6
Press [MENU] to exit the program.
Note:
·
This information will be printed on each page transmitted
from your unit.
from your unit.
20
KX-FP343UA
Click on the first or last page to see other KX-FP343UA service manuals if exist.