Panasonic KX-FLM663RU Service Manual ▷ View online
9
KX-FLM663RU
2.5.
LASER BEAM AND FUSER UNIT SECTION
• The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• The fuser unit is inside of the unit and gets hot. Do not touch it when removing the jammed paper or cleaning the lower glass.
10
KX-FLM663RU
3 Specifications
* Transmission speed depends on the contents of the pages, resolution, telephone line conditions and capability of the other party’s
machine.
** Transmission speed is based on the ITU-T No. 1 Test Chart (Refer to ITU-T No.1 TEST CHART(P.222).) with original mode. If the
capability of the other party's machine is inferior to your unit, the transmission time may be longer.
Note:
machine.
** Transmission speed is based on the ITU-T No. 1 Test Chart (Refer to ITU-T No.1 TEST CHART(P.222).) with original mode. If the
capability of the other party's machine is inferior to your unit, the transmission time may be longer.
Note:
• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
• The pictures and illustrations in these instructions may vary slightly from the actual product.
• The accuracy of the clock is approximately ±60seconds a month.
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm in width
Max. 600 mm in length
Max. 600 mm in length
Effective Scanning Width:
208 mm
Effective Printing Width:
A4 : 202mm
Letter/Legal : 208mm
Letter/Legal : 208mm
Transmission Time*:
Approx. 4 s/page (ECM-MMR Memory transmission)**
Scanning Density:
Scanning resolution:
Up to 203
Up to 203
× 392 dpi (Optical)
Up to 9,600
× 9,600 dpi (Interpolated)
Copy resolution:
Up to 600
Up to 600
× 600 dpi
FAX resolution:
Horizontal:
8 pels/mm
Vertical:
3.85 lines/mm-STANDARD
7.7 lines/mm-FINE/PHOTO
15.4 lines/mm -SUPER FINE
Horizontal:
8 pels/mm
Vertical:
3.85 lines/mm-STANDARD
7.7 lines/mm-FINE/PHOTO
15.4 lines/mm -SUPER FINE
Photo Resolution:
64-level
Scanner Type:
Monochrome Contact Image Sensor
Printer Type:
Laser printer
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified, Modified READ (MMR)
Modem Speed:
33,600/31,200/28,800/26,400/24,00/21,600/19,200/16,800/14,400/12,000/9,600/7,200/
4,800/2,400 bps; Automatic Fallback
4,800/2,400 bps; Automatic Fallback
Operating Environment:
10
°C—32.5°C, 20—70% RH (Relative Humidity)
Dimensions (H
×W×D):
370 mm
× 430 mm × 480 mm
Mass (Weight):
Approx. 9.4 kg
Power Consumption:
Standby: Approx. 7.5 W
Transmission: Approx. 18 W
Reception: Approx. 300 W
Copy: Approx. 310 W
Maximum: Approx. 950 W (When the fuser lamp turns on)
Transmission: Approx. 18 W
Reception: Approx. 300 W
Copy: Approx. 310 W
Maximum: Approx. 950 W (When the fuser lamp turns on)
Power Supply:
220 - 240V AC, 50/60 Hz
Memory capacity
(for operation and storing memory):
(for operation and storing memory):
32 MB
Fax Memory Capacity:
2 MB in total
Approx. 170 pages of memory reception.
Approx. 150 pages of memory transmission.
(Based on ITU-T No. 1 Test Chart in standard resolution, without using the Error Correction
Mode.)
Approx. 170 pages of memory reception.
Approx. 150 pages of memory transmission.
(Based on ITU-T No. 1 Test Chart in standard resolution, without using the Error Correction
Mode.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—810 nm
Emission duration: Continuous
Wave length: 760 nm—810 nm
Emission duration: Continuous
Print Speed:
14 ppm (page per minute)
Printing Resolution:
600
× 600 dpi
Compatible OS:
Windows 98/Me/2000/XP/Vista
®
11
KX-FLM663RU
4 General/Introduction
4.1.
OPTIONAL ACCESSORIES
4.2.
TRANSLATION LISTS
4.2.1.
HELP FUNCTION
4.2.2.
ERROR MESSAGE (REPORT)
Model No.
Description
Specifications
KX-FA83A
Toner cartridge
1 toner cartridge
KX-FA84A
Drum unit
1 drum unit
12
KX-FLM663RU
4.2.3.
ERROR MESSAGE (DISPLAY)
4.2.4.
OTHER
Click on the first or last page to see other KX-FLM663RU service manuals if exist.