Panasonic KX-FL543RU Service Manual ▷ View online
3.2. CONNECTIONS
(1) Connect the telephone line cord.
(2) Connect the power cord.
·
When the power is turned on for the first time, the unit will print some basic information.
Caution:
·
When you operate this product, the power outlet should be near the product and easily accessible.
·
Be sure to use the telephone line cord included in this unit.
·
Do not extend the telephone line cord.
Note:
·
The warranty does not cover damage due to power line surges or lightning. For additional equipment protection, we
recommend the use of a surge protector. The following types are available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG.
CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
recommend the use of a surge protector. The following types are available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG.
CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
·
To avoid malfunction, do not position fax machine near appliances such as TVs or speakers which generate an intense
magnetic field.
magnetic field.
·
If any other device is connected on the same line, this unit may disturb the network condition of the device.
17
KX-FL543RU
3.3. INSTALLATION
3.3.1. INSTALLATION SPACE
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
·
Avoid excessive heat or humidity.
·
Use the unit within the following ranges of temperature and humidity.
·
Ambient temperature: 10°C to 32.5°C
·
Relative humidity: 20% to 80% (without condensation)
·
Power cord length should be less than 5 meters (16.4 feet). Using a longer cord may reduce the voltage or cause
malfunctions.
malfunctions.
·
Avoid direct sunlight.
·
Do not install near devices which contain magnets or generate magnetic fields.
·
Do not subject the unit to strong physical shock or vibration.
·
Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
·
To protect the unit from damage, hold both sides when you move it.
·
Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall, etc.)
·
Keep this surface ( ) away from walls etc. more than 50 mm (1 31/32”) to let the unit cool down.
18
KX-FL543RU
3.3.2. PAPER STACKER
Line up the slots ( ) in the paper stacker with the pegs ( ) on the
bottom of the unit, then insert the two tabs of the paper stacker into the
slots on the unit ( ).
bottom of the unit, then insert the two tabs of the paper stacker into the
slots on the unit ( ).
·
The paper stacker can hold up to approximately 100 sheets of
printed paper. Remove the printed paper before the paper stacker
becomes full.
printed paper. Remove the printed paper before the paper stacker
becomes full.
3.3.3. DOCUMENT STACKER
Pull the document stacker (
) forward gently until it clicks into place,
then press the center part of the document stacker (
) to open the
document stacker extender ( ).
19
KX-FL543RU
3.3.4. PAPER TRAY
Insert the paper tray (
) into the slot ( ) on the back of the unit.
Note for installation:
·
Do not place the unit in an area where the paper tray may be
obstructed (i.e. by a wall etc.).
obstructed (i.e. by a wall etc.).
·
Document and recording paper will be ejected from the front
of the unit. Do not place anything in front of the unit.
of the unit. Do not place anything in front of the unit.
·
Keep this surface (
) away from walls etc. more than 50 mm
to let the unit cool down.
20
KX-FL543RU
Click on the first or last page to see other KX-FL543RU service manuals if exist.