DOWNLOAD Panasonic KX-FC268RU-T Service Manual ↓ Size: 10.86 MB | Pages: 127 in PDF or view online for FREE

9

KX-FC268RU-T

1. Unplug the power cord and short the two prongs of the plug with a jumper wire.
2. Turn on the power switch.
3. Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part

(screw heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.

4. If the measurement is outside the specified limits, there is a possibility of a shock hazard.

Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

These symbols ((1), (2), (3)) on the products, packaging, and/or accompanying documents mean that used electrical and elec-
tronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection
points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential nega-
tive effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more
information about collection and recycling of old products and batteries, please contact your local municipality, your waste dis-
posal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
These symbols ((1), (2), (3)) are only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol
This symbol ((2)) might be used in combination with a chemical symbol ((3)). In this case it complies with the requirement set by
the Directive for the chemical involved.

Please inform users of the danger of data being lost at the time of repair.
Data will be lost in the following situations.

1. When replacing the ROM ass'y.
2. When replacing the Main board ass'y.
3. When executing mode #550 or #710.

There is a possibility of data loss in the following situations.

1. When removing a board.
2. When writing new software to ROM.

10

KX-FC268RU-T

Any details given in these instructions are subject to change without notice.

*

1

  Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other 

party’s machine.

*

2

  Transmission speed is based upon the ITU-T No. 1 Test Chart with original mode. If the capability of the other party’s machine is

 

inferior to your unit, the transmission time may be longer. (Refer to ITU-T No.1 Test Chart (P.208).)

*

3

If an error occurs during fax reception, such as a paper jam or if the recording paper runs out, the fax and subsequent faxes will
be retained in memory.

*

4

  Recording time may be reduced by the calling party’s background noise.

• Design and specifications are subject to change without notice.
• The pictures and illustrations in these instructions may vary slightly from the actual product.

Public Switched Telephone Network

Max. 216 mm in width, Max. 600 mm in length

208 mm 

202 mm

Approx.  12 s/page (ECM-MMR)*

2

Horizontal: 8 pels/mm
Vertical: 
3.85 lines/mm - in standard resolution
7.7 lines/mm - in fine/photo resolution
15.4 lines/mm - in super fine resolution

64 levels

Contact Image Sensor

Thermal Transfer on Plain Paper

Modified Huffman (MH), Modified READ (MR), Modified Modified READ (MMR)

9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback

5

°C—35°C, 20%—80 % RH (Relative Humidity)

Approx. height 106 mm 

× width 374 mm × depth 200 mm

Approx. 2.7 kg

Standby: Approx. 4.0 W
Transmission: Approx. 15 W
Reception: Approx. 40 W (When receiving a 20% black document)
Copy: Approx. 40 W (When copying a 20% black document)
Maximum: Approx. 135 W (When copying a 100% black document)

220 V - 240 V AC, 50/60 Hz

Approx. 25 pages of memory transmission 
Approx. 28 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard resolution, without using the
Error Correction Mode.)

Approx. 15 minutes of recording time

Approx. 10 pages
(Based on the ITU-T No. 1 Test Chart in fine resolution.)

LED radiation output: Max. 1 mW
Wavelength: Yellowish Green 570 nm typical
Emission duration: Continuous

11

KX-FC268RU-T

DECT (Digital Enhanced Cordless Telecommunications)
GAP (Generic Access Profile)

120 Duplex channels

1.88 GHz to 1.90 GHz

TDMA (Time Division Multiple Access)

1,728 kHz

1,152 kbit/s

GFSK (Gaussian Frequency Shift Keying)

Approx. 10 mW (average power per channel)

ADPCM 32 kbit/s

0

°C - 40°C, 20 % - 80 % RH (Relative Humidity)

Up to 300 m outdoors, Up to 50 m indoors

Approx. height 158 mm 

× width 48 mm × depth 30 mm

Approx. 130 g

12

KX-FC268RU-T

*1

 To ensure the unit operates properly, we recommend the Panasonic replacement film.

*2

 Replacement batteries may have a different capacity from that of the supplied batteries.

Model No.

Description

Specification

 Replacement film

*1

 30 m 

×

 2 rolls

(Each roll will print about 90 A4-sized pages)

 Recharageable batteries*

2

 2 rechargeable nickel metal hydride (Ni-MH) batteries, 
AAA (R03) size.

 Additional digital cordless handset

 -------------------

 DECT repeater

 -------------------