Panasonic KX-FC235G-S Service Manual ▷ View online
Other NG example while the power is ON and the LCD displays the following.
Note:
Refer to Error Message (Display) (P.4) for display message.
113
KX-FC235G-S
7.7.6.2. NG Example
114
KX-FC235G-S
7.7.7. Analog Board Section
This chapter provides the testing procedures required for the analog parts. A signal route to be tested is determined depending
upon purposes. For example, the handset TX route begins at the handset microphone and the signal is output to the telephone
line. The signal mainly flowing on this route is analog. You can trace the signal with an oscilloscope. The signal flow on each
route is shown in the Check Sheet here. If you find a specific problem in the unit, for example if you cannot communicate with
the H/S, trace that signal route locally with the following Check Sheet and locate the faulty point.
upon purposes. For example, the handset TX route begins at the handset microphone and the signal is output to the telephone
line. The signal mainly flowing on this route is analog. You can trace the signal with an oscilloscope. The signal flow on each
route is shown in the Check Sheet here. If you find a specific problem in the unit, for example if you cannot communicate with
the H/S, trace that signal route locally with the following Check Sheet and locate the faulty point.
7.7.7.1. Check Sheet
115
KX-FC235G-S
116
KX-FC235G-S
Click on the first or last page to see other KX-FC235G-S service manuals if exist.