Panasonic KX-F206TW Simplified Service Manual ▷ View online
KX-F206TW
(for Taiwan)
PARSONAL FACSIMILE
Please file and use this manual together with the service manual for Model No. KX-FT21RS, Order
No.KM79911336C3. This Service Manual indicates the main differences between; Original KX-FT21RS and
KX-F206TW.
No.KM79911336C3. This Service Manual indicates the main differences between; Original KX-FT21RS and
KX-F206TW.
ORDER NO. KM79911347A3
1 INTRODUCTION
1.1. INSULATION RESISTANCE TEST
Change from original page 3 (1.2. INSULATION RESISTANCE TEST)
1. Unplug the power cord and short the two prongs of the plug with a jumper wire.
2. Turn on the power switch.
3. Measure the resistance value with an ohmmeter between the jumpered AC plug and each exposed metal cabinet part (screw
heads, control shafts, bottom frame, etc.).
Note: Some exposed parts may be isolated from the chassis by design. These will read infinity.
4. If the measurement is outside the specified limits, there is a possibility of a shock hazard.
The equipment should be repaired and rechecked before it is returned to the customer.
2
KX-F206TW
1.2. SPECIFICATIONS
Change from original page 7 (1.8. SPECIFICATIONS)
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm (8 1/2”) in width
Max. 600 mm (23 5/8”) in length
Effective Scanning Width:
208mm (8 3/16”)
Recording Paper Size:
216 mm max. 30 m (8 1/2”×98”) roll
Effective Printing Width:
208 mm (8 3/16”)
Transmission Time*:
Approx. 15 s/page (Original mode)**
Approx. 30 s/page (G3 Normal mode)
Scanning Density:
Horizontal:
8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch)—STANDARD mode
7.7 lines/mm (196 lines/inch)—FINE/HALF TONE mode
15.4 lines/mm (392 lines/inch)—SUPER FINE mode
Halftone Level:
64-level
Scanner Type:
Contact Image Sensor (CIS)
Printer Type:
Thermal Printing
Data Compression System:
Modified Huffman (MH), Modified READ (MR)
Modem Speed:
9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback
Operating Environment:
5°C—35°C (41°F—95°F), 45 %—85 % RH (Relative Humidity)
Dimensions (H×W×D):
122 mm × 338 mm × 240 mm (4 13/16” × 13 5/16” × 9 7/16”)
Mass (Weight):
Approx. 2.5 kg (5.5 lb.)
Power Consumption:
Standby: Approx. 6.0 W
Transmission: Approx. 16 W
Reception: Approx. 22 W (When receiving the CCITT No. 1 Test Chart)
Copy: Approx. 22 W (When copying the CCITT No. 1 Test Chart)
Maximum: Approx. 120 W (When copying a 100 % black document)
Power Supply:
110 V AC, 60 Hz
* Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party´s machine.
party´s machine.
** The 15 second speed is based upon the CCITT No. 1 Test Chart.
Note:
·
Any details given in these instructions are subject to change without notice.
·
The pictures and illustrations in these instructions may vary slightly from the actual product.
3
KX-F206TW
1.3. LOCATION OF CONTROLS
1.3.1. CONTROL PANEL
Change from original page 9 (1.11.2. CONTROL PANEL)
4
KX-F206TW
