Panasonic DVD-S68EE / DVD-S48EE Service Manual ▷ View online
21
9.1.3.
Top Panel
1. Remove the 5 Screws (A).
2. Expanded the both ends of the back of the top panel in
2. Expanded the both ends of the back of the top panel in
the direction of arrow (1), and then remove it pull up in the
direction of arrow (2).
direction of arrow (2).
9.1.4.
Front Panel
1. Insert paper clips, etc. into the hole on the bottom of DVD
Drive, and slide thelever in the direction of arrow to eject
tray slightly.
tray slightly.
2. Unlock 2 tabs.
3. Remove the Wire with Connector (A).
4. Remove the Wire with Connector (B).
5. Unlock 3 tabs.
6. Remove the Front Panel.
4. Remove the Wire with Connector (B).
5. Unlock 3 tabs.
6. Remove the Front Panel.
(The Front Panel is detached from the Tray while inclined
a little as shown below.)
a little as shown below.)
9.1.5.
Front P.C.B. and SW P.C.B.
1. Remove the 5 Screws (A).
2. Remove the 2 Earth Plates.
3. Remove the Wire with Connector (A).
4. Unlock tab.
5. Remove the Front P.C.B. and SW P.C.B..
2. Remove the 2 Earth Plates.
3. Remove the Wire with Connector (A).
4. Unlock tab.
5. Remove the Front P.C.B. and SW P.C.B..
22
9.1.6.
Digital P.C.B. and Power Supply
P.C.B.
P.C.B.
1. Remove the 4 Screws (A).
2. Remove the Wire with Connector (A).
3. Remove the AC cord.
4. Remove the Wire with Connector (B),
2. Remove the Wire with Connector (A).
3. Remove the AC cord.
4. Remove the Wire with Connector (B),
Wire with Connector (C) and Wire with Connector (D).
5. Remove the FFC.
6. Remove the 4 Screws (B).
7. Remove the Digital P.C.B. and Power Supply P.C.B..
6. Remove the 4 Screws (B).
7. Remove the Digital P.C.B. and Power Supply P.C.B..
9.1.7.
Mechanism Unit
1. Remove the Screw (A).
2. Remove the Wire with Connector (A) and Wire with
2. Remove the Wire with Connector (A) and Wire with
Connector (B).
3. Remove the FFC.
4. Remove the Mechanism Unit.
4. Remove the Mechanism Unit.
Manual release method of tray
1. Insert paper clips, etc. into the hole on the bottom of DVD
Drive, and slide the lever in the direction of arrow to eject
tray slightly.
tray slightly.
2. Pull the tray in the direction of the arrow.
23
9.2.
Unit (DVD-S68)
9.2.1.
Disassembly Flow Chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
9.2.2.
P.C.B. Positions
24
9.2.3.
Top Panel
1. Remove the 5 Screws (A).
2. Expanded the both ends of the back of the top panel in
2. Expanded the both ends of the back of the top panel in
the direction of arrow (1), and then remove it pull up in the
direction of arrow (2).
direction of arrow (2).
9.2.4.
Front Panel
1. Insert paper clips, etc. into the hole on the bottom of DVD
Drive, and slide thelever in the direction of arrow to eject
tray slightly.
tray slightly.
2. Unlock 2 tabs.
3. Remove the Wire with Connector (A).
4. Remove the Wire with Connector (B).
5. Unlock 3 tabs.
6. Remove the Front Panel.
4. Remove the Wire with Connector (B).
5. Unlock 3 tabs.
6. Remove the Front Panel.
(The Front Panel is detached from the Tray while inclined
a little as shown below.)
a little as shown below.)
9.2.5.
Front P.C.B. and SW P.C.B.
1. Remove the 5 Screws (A).
2. Remove the 2 Earth Plates.
3. Remove the Wire with Connector (A).
4. Unlock tab.
5. Remove the Front P.C.B. and SW P.C.B..
2. Remove the 2 Earth Plates.
3. Remove the Wire with Connector (A).
4. Unlock tab.
5. Remove the Front P.C.B. and SW P.C.B..
Click on the first or last page to see other DVD-S68EE / DVD-S48EE service manuals if exist.