Panasonic DMR-EH69EC / DMR-EH69EE / DMR-EH69EP / DMR-EH695EG / DMR-EX89EB / DMR-EX89EC / DMR-EX89EG / DMR-EX89EP Service Manual ▷ View online
21
7.1.3.
Service Modes at a glance
Service mode setting: While the power is off, press REC, CH UP and OPEN / CLOSE simultaneously for five seconds.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
Release Items
Item of Service Mode executing is cancelled.
Press [0] [0] or [Return] in service
mode.
mode.
Error Code Display
Last Error Code of U/H/F held by Timer is dis-
played on FL.
*Details are described in “7.1.1. Self-Diagno-
sis Functions”.
played on FL.
*Details are described in “7.1.1. Self-Diagno-
sis Functions”.
If any error history does not exist,
[F00] is displayed.
[F00] is displayed.
Press [0] [1] in service mode
ROM Version Display
1. Region code (displayed for 5 sec.)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
6. Loader version (displayed for 5 sec.)
7. Device information version (displayed for 5
sec.)
8. ST Microprocessor version (left displayed)
2. Main firm version (displayed for 5 sec.)
3. Timer firm version (displayed for 5 sec.)
4. Drive firm version (displayed for 5 sec.)
5. ROM correction version (displayed for 5
sec.)
6. Loader version (displayed for 5 sec.)
7. Device information version (displayed for 5
sec.)
8. ST Microprocessor version (left displayed)
Press [0] [2] in service mode
White Picture Output
White picture is output as component Output
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive
by “I/P switch: [1] [4]”
from AV Decoder.
*White picture
(Saturation rate : 100%)
*It is enable to switch Interlace/Progressive
by “I/P switch: [1] [4]”
*Initial mode is “Interlace”.
Press [1] [1] in service mode.
Switch Interlace/Progressive
Press [1] [4] in White Picture Output
mode.
*I/P are switched alternately.
mode.
*I/P are switched alternately.
22
Magenta Picture Output
Magenta picture is output with Component
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by “I/P switch: [1] [4]”
Output from AV Decoder.
*Magenta picture
(Saturation rate: 100%)
*It is enable to switch Interlace/Progressive
by “I/P switch: [1] [4]”
*Initial mode is “Interlace”.
Press [1] [2] in service mode.
Switch Interlace/Progressive
Press [1] [4] in Magenta Picture
Output mode.
*I/P are switched alternately.
Output mode.
*I/P are switched alternately.
RTSC Return in XP
(A & V)
(A & V)
AV1 input signal is encoded (XP), decoded
(XP) and output decoded signal to external
without DISC recording and DISC playback.
(XP) and output decoded signal to external
without DISC recording and DISC playback.
Initial mode: EE2/ Interlace/ XP/
Audio 48kHz
Audio 48kHz
Press [1] [3] in service mode.
Switch Interlace/Progressive
Press [1] [4] in RTSC Return XP
mode.
*I/P are switched alternately.
mode.
*I/P are switched alternately.
Audio 44.1 kHz/ 48 kHz Switch
Press [2] [4] in RTSC Return XP
mode.
*48 kHz / 44.1 kHz are switched
alternately.
mode.
*48 kHz / 44.1 kHz are switched
alternately.
I/P Switch
Switch Interlace and Progressive in EE mode.
*Initial setting is “Interlace”.
*This command is effective during executing
“White Picture Output”, “Magenta Picture Out-
put” and “RTSC Return in XP (A & V)” modes.
*Initial setting is “Interlace”.
*This command is effective during executing
“White Picture Output”, “Magenta Picture Out-
put” and “RTSC Return in XP (A & V)” modes.
Initial mode is Interlace
Switch Interlace/Progressive
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
*I/P are switched alternately.
Audio Mute (XTMUTE)
Check whether mute is applied normally by
the timer microprocessor.
the timer microprocessor.
Press [2] [1] in service mode.
Audio Mute (XDMUTE)
Check whether mute is applied normally by
the Digital P.C.B..
the Digital P.C.B..
Press [2] [2] in service mode.
Audio Pattern Output
The audio pattern stored in the internal mem-
ory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
ory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
Initial mode (Audio 48kHz)
Press [2] [3] in service mode.
Audio 44.1kHz/48kHz switching
Press [2] [4] in Audio Pattern Output
mode.
*48 kHz / 44.1 kHz are switched
alternately.
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
23
HDD READ SEEK
Inspection
Inspection
Inspecting seek time of HSS to inspect perfor-
mance.
mance.
At start
The [*] sign is added every 20 sec-
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is
excluding o )
(Transfer rate is calculated from the
AV scanning result, and when it is
less than 35Mbps, NG is displayed.)
excluding o )
(Transfer rate is calculated from the
AV scanning result, and when it is
less than 35Mbps, NG is displayed.)
$: [X] is displayed when seek time is
over 270msec., there is error or
transfer rate is NG.
Position at $ is space when exclud-
ing those.
##: Number of data of over
100msec. and less than 270msec.
When it is over 100, [99] is dis-
played.
When the number is less than 5, we
judge it normal.
over 270msec., there is error or
transfer rate is NG.
Position at $ is space when exclud-
ing those.
##: Number of data of over
100msec. and less than 270msec.
When it is over 100, [99] is dis-
played.
When the number is less than 5, we
judge it normal.
Press [3] [1] in service mode.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key more than 4
seconds.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key more than 4
seconds.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
24
HDD READ VERIFY
Inspection
Inspection
Measure of access time in READ VERIFY
MODE of HDD.
MODE of HDD.
At start
The [*] sign is added every 20 sec-
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
onds while inspecting.
Two digits on the right side are the
progress level of the inspection
(The unit is %).
Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is
excluding o)
(Transfer rate is calculated from the
AV scanning result, and when it is
less than 35Mbps, NG is displayed.)
excluding o)
(Transfer rate is calculated from the
AV scanning result, and when it is
less than 35Mbps, NG is displayed.)
$: [X] is displayed when seek time is
over 270msec., there is error or
transfer rate is NG.
Position at $ is space when exclud-
ing those.
##: Number of data of over
100msec. and less than 270msec.
When it is over 100, [99] is dis-
played.
When the number is less than 5, we
judge it normal.
over 270msec., there is error or
transfer rate is NG.
Position at $ is space when exclud-
ing those.
##: Number of data of over
100msec. and less than 270msec.
When it is over 100, [99] is dis-
played.
When the number is less than 5, we
judge it normal.
Press [3] [2] in service mode.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key more than 4
seconds.
* When canceling the inspection
mode while executing, do “forced
power-off”.
Method:
Press [POWER] key more than 4
seconds.
HDD Spin-up time
The accumulation value of the Spin-up time of
HDD is displayed.
HDD is displayed.
Spin-up time of HDD is displayed.
(The unit of display is second.)
(The unit of display is second.)
Press [3] [3] in service mode.
Item
FL display
Key operation
Mode name
Description
(Remote controller key)
Click on the first or last page to see other DMR-EH69EC / DMR-EH69EE / DMR-EH69EP / DMR-EH695EG / DMR-EX89EB / DMR-EX89EC / DMR-EX89EG / DMR-EX89EP service manuals if exist.