Panasonic DMR-EH68EC / DMR-EH68EP / DMR-EH685EG Service Manual ▷ View online
9.5. Front (L) P.C.B., Front (R)
P.C.B.
1. Remove the 2 Screws (A) to remove the Front (L) P.C.B.
and Front (R) P.C.B.
9.6. HDD, ATAPI P.C.B.
33
DMR-EH68EC / DMR-EH68EP / DMR-EH685EG
1. Remove the 2 Screws (A) and (B), FFC and Wire with
connector to remove HDD with ATAPI P.C.B..
CAUTION:
When replacing HDD, pay attention as below.
2. Put HDD with HDD angle up and down inversely so as not
to give a shock to HDD.
3. Remove 4 Screws (C) to remove HDD from HDD angle.
34
DMR-EH68EC / DMR-EH68EP / DMR-EH685EG
9.7. RAM/Digital P.C.B. Module
1. Remove the 3 Screws (A) and Screw (B) to remove Digital
Shield.
2. Lift up Digital P.C.B. slightly so to disconnect connectors to
remove Digital P.C.B..
And remove 3 Screws (C) to remove DVD drive.
3. Put Digital P.C.B. on DVD drive and remove RAM/Digital
P.C.B. Module.
Note:
RAM/Digital P.C.B. Module as service part has no heat sink
and heat transfer sheet.
and heat transfer sheet.
Before returning to customer, heat sink and heat transfer
sheet should be installed on Digital P.C.B..
sheet should be installed on Digital P.C.B..
35
DMR-EH68EC / DMR-EH68EP / DMR-EH685EG
9.8. DV Jack P.C.B., USB SD
P.C.B.
1. Remove 2 Screw (A) and connector to remove DV Jack
P.C.B. and USB SD P.C.B.
36
DMR-EH68EC / DMR-EH68EP / DMR-EH685EG
Click on the first or last page to see other DMR-EH68EC / DMR-EH68EP / DMR-EH685EG service manuals if exist.