Panasonic DMR-EH49EC / DMR-EH49EE / DMR-EH49EP / DMR-EH59EC / DMR-EH59EE / DMR-EH59EM / DMR-EH59EP / DMR-EH495EG / DMR-EH595EG Service Manual ▷ View online
29
8 Service Fixture & Tools
Part Number
Description
Compatibility
RFKZ0260
Extension Cable (MainP.C.B. - Digital P.C.B./ 88 Pin)
Same as EH50 Series
RFKZ0323
Extension Cable (MainP.C.B. - Power P.C.B./ 9 Pin)
Same as E55 Series
RFKZ0125
Extension FFC (ATAPI (SATA) P.C.B. - Digital P.C.B./ 40 Pin)
Same as EH55 Series
RFKZ0169
Extension Cable (MainP.C.B. - HDD / 4 Pin)
Same as EH55 Series
RFKZ0367
Extension Cable (MainP.C.B. - Front (R) P.C.B. / 6 Pin)
Same as EH75V Series
JZS0484
Eject Pin
Same as E50 Series
RFKZ03D01KS
Lead Free Solder (0.3mm/100g Reel)
Same as EH55 Series
RFKZ06D01KS
Lead Free Solder (0.6mm/100g Reel)
Same as EH55 Series
RFKZ10D01KS
Lead Free Solder (1.0mm/100g Reel))
Same as EH55 Series
RFKZ0316
Solder Remover (Lead free low temperature Solder/50g)
Same as EH55 Series
RFKZ0328
Flux
Same as EH55 Series
30
9 Disassembly and Assembly Instructions
Note:
In this document, explanations basically use illustrations of DMR-EH49/495. For RMR-EH59/595, shape of some parts may be
different.
different.
9.1.
Disassembly Flow Chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing. To assemble the unit, reverse the steps shown in the chart below
vicing. To assemble the unit, reverse the steps shown in the chart below
31
9.2.
P.C.B. Positions
32
9.3.
Top Case
1. Remove the 2 screws (A) and 3 screws (B).
2. Slide Top Case rearward and open the both ends at rear
2. Slide Top Case rearward and open the both ends at rear
side of the Top Case a little and lift the Top Case in the
direction of the arrows.
direction of the arrows.
9.4.
Front Panel
1. Unlock 6 tabs in (A) - (F) turn.
Pull with the Front Panel in the direction of your side.
9.4.1.
How to assemble Tray door ass’y
1. Attach the Tray door spring to Tray door ass’y.
2. Attach Tray door ass’y in order from
to
.
Insert the shaft in the hole.
Insert the shaft in the hole.
3. Confirm the Tray door spring is attached as following.
Click on the first or last page to see other DMR-EH49EC / DMR-EH49EE / DMR-EH49EP / DMR-EH59EC / DMR-EH59EE / DMR-EH59EM / DMR-EH59EP / DMR-EH495EG / DMR-EH595EG service manuals if exist.