Panasonic DMP-BDT130EE / DMP-BDT330EE Service Manual ▷ View online
17
7 Service Mode
7.1.
About the Multiple Pressing of the Unit’s Remote Control
The remote control which included this unit is possible pressing multiple buttons simultaneously (Multiple Pressing function), and
can operate for the customer's initial settings and the Service Mode, etc.
The Multiple Pressing function is not available for conventional models' remote control. Use the remote control included this unit.
can operate for the customer's initial settings and the Service Mode, etc.
The Multiple Pressing function is not available for conventional models' remote control. Use the remote control included this unit.
7.2.
How to enter the Special Modes using the Multiple Pressing Function of
the Unit’s Remote Control
the Unit’s Remote Control
For pressing the multiple buttons of the remote control, this unit can be entering each of the following special modes.
After entering each mode, and then go to the menu you want to run.
After entering each mode, and then go to the menu you want to run.
• Move the menus for each mode:
Press [ ] button (Remote Cont.) or [POWER] button (Unit)
• Execute
Press [OK] button (Remote Cont.) or [O/C] button (Unit)
* After excuting the menu will automatically exit the special mode.
• How to exit from the special modes
• Press the unrelated buttons for the operation.
• No operation for 2 minutes or more.
• Press and hold [POWER] button on the unit. (Forcible Power Off)
• No operation for 2 minutes or more.
• Press and hold [POWER] button on the unit. (Forcible Power Off)
18
7.2.1.
Open Mode (Remote Cont. Buttons: [OK] [Yellow] [Blue])
When pressing the 3 buttons, [OK], [Yellow] and [Blue] simultaneously for 5 seconds, “00RET” is displayed on the FL display.
19
7.2.2.
Privately Mode 1 (Remote Cont. Buttons: [6] [7] [Yellow])
When pressing the 3 buttons, [6], [7] and [Yellow] simultaneously for 5 seconds, “50RET” is displayed on FL display.
7.2.3.
Privately Mode 2 (Remote Cont. Buttons: [5] [9] [Red])
When pressing the 3 buttons, [5], [9] and [Red] simultaneously for 5 seconds, “70RET” is displayed on FL display.
20
7.3.
About the Service Mode
Informations necessary for service can be displayed.
7.3.1.
How to enter the Service Mode
7.3.2.
How to exit the Service Mode
Press and hold the [POWER] button (remote control or unit).
>>> The Service Mode is terminated and automatically turns the unit off.
Click on the first or last page to see other DMP-BDT130EE / DMP-BDT330EE service manuals if exist.